Μηχανή χύτευσης με έγχυση

Arburg 520S 1600-290/290

520 S 1600 - 290/290

Complete thermoplastic cylinder 35 mm, highly wear-resistant
Complete thermoplastic cylinder 35 mm, highly wear-resistant for 2nd injection unit (SPE)
Drive unit with 30 kW motor and 65 l/min charging volume flow
Hydraulic accumulator module with 64 l storage volume (max. 230 bar)
Selogica direct control system
Technology level: accumulator drive
Multi-component processing
2nd injection unit 290 vertical
Open nozzle 25 mm
Open nozzle 35 mm
Open nozzle 35 mm for 2nd injection unit
Tip for open nozzle
Electrical and hydraulic actuation NVD in the mould for 1st injection unit
Electrical and hydraulic actuation NVD in the mould for 2nd injection unit
Heating band for open nozzle
Heating band for open nozzle for 2nd injection unit
Heating/cooling jacket for open nozzle
Variable clamping plate set Ø 125 mm
Minimum installation height extended to 450 mm
Blow-out device 1 with pressure reducer
Selector unit incl. connection
Ejector pressure P/Q regulated (requirement: T2)
Core pull 1, simultaneous movement, P/Q regulated, programmable
Core pull 2, simultaneous movement, P/Q regulated, programmable
Electrical core pull control 1 (requirement: VE 436/00)
Top guard open, raised to safety dimensions
Commissioning test for hydraulic accumulator
Continuous oil cooling and filtration
Increased cooling capacity
Parting line equipment on short carriers for 2nd SPE
Nozzle contact force controlled, programmable for 1st injection unit
Nozzle contact force controlled, programmable for 2nd injection unit
Conveyor connection electrically via socket combination
Emergency stop interface 1 on 24-pin interface, 2-channel
Emergency stop interface 2 on 24-pin interface, 2-channel
Temperature release for 450°C and reinforced cylinder heating
Basic equipment for electrical axis control
Host computer interface ARBURG
8 programmable digital inputs/outputs on terminal strip
Mould temperature control unit interface 20 mA
Connection cable for REGLOPLAS temperature control unit
Printer interface, serial USB
External PC keyboard with USB interface
Dedpfxoxl Ty Ej Aaceku
Additional floppy drive via USB interface
CompactFlash interface for data storage
Operator authorization via chip card according to EUROMAP 65
Holder for PC keyboard with USB connection
Injection with mould closing ("flying injection")
3 measuring circuits for mould temperature
15 electric heating control circuits for mould heating
Device interface
Start-up parameters
Post-pressure switchover channel 3 on fixed mould plate
Colouring device interface
LSR device interface via 6-pin Harting socket
Colouring device interface for 2nd injection unit
Interface for vacuum control
Vacuum control with ventilation function
Vacuum monitoring via analog signal
Vacuum unit 40 m³/h
Kit for connecting mould to vacuum valve
Interface for flow monitoring for cold runner system
Energy monitoring and energy demand display
2 cooling water circuits routed to fixed mould plate
2 cooling water circuits routed to moving mould plate
4 free cooling circuits, manually adjustable
Basic equipment for 2nd cooling water distributor (manual)
7 free cooling circuits, manually set for 2nd water distributor
Machine-related cooling circuits controlled
Equipment package: advanced monitoring
Equipment package: advanced movements
Equipment package: production control
Equipment package: optimisation / operating aids
Equipment package: quality assurance
Equipment package: documentation
aXw Control ScrewPilot for 1st injection unit
aXw Control ScrewPi

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.