100/40TON Τύπος Υδραυλικής Σφυρηλάτησης με Στύλους

CRONOSSTECH CHKSP 100/40

CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description

The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial press solution with a robust four-column frame, specifically designed for metal forming, deep drawing, and precision pressing applications.

The St52 grade steel frame undergoes stress relief via vibration to ensure durability. This design maintains high parallelism and squareness tolerances over extended periods. The ram and blank holder systems operate independently, with stroke and pressure settings managed precisely via the touch panel.

REXROTH or PARKER hydraulic components, IE3 efficiency-class motor, and PLC-controlled architecture provide high efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts reduce maintenance requirements to a minimum.

This model is an ideal solution for medium-scale series production, die try-out, and precision forming applications.

Key Advantages

- Robust four-column press frame
- Independent stroke and tonnage adjustment for ram and blank holder
- Full control via touch panel
- High accuracy and repeatability
- Low maintenance cost and long life

Application Areas

- Metal forming operations
- Deep drawing applications
- Die try-out and prototype production
- Auxiliary pressing operations

⚙️ STANDARD & TECHNICAL SPECIFICATIONS

TYPE: Four-Column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts
GUIDEWAY BEARINGS: Bronze Zr14
CAPACITY (RAM): 100 ton
CAPACITY (BLANK HOLDER): 40 ton
DISTANCE BETWEEN COLUMNS: 800 × 800 mm
PARALLELISM TOLERANCE: 120 micron/meter
SQUARENESS TOLERANCE: 60 micron/meter
STROKE (RAM): 600 mm
STROKE (BLANK HOLDER): 200 mm
MIN. DAYLIGHT: 100 mm
MAX. DAYLIGHT: 700 mm

WELDING STRESS RELIEF: By vibration
WELDING PROCESS: TÜRK-AK WPQR & WPS accredited – EN ISO 15614-1:2017 (EN ISO 14731)

MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 15 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER

MOVING TABLE FAST DESCENT SPEED: 150 mm/s
MOVING TABLE DRAWING SPEED: 12 mm/s
MOVING TABLE RETURN SPEED: 170 mm/s
BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s

MAIN CYLINDER BORE: Ø 230 mm – Ck45
BLANK HOLDER CYLINDER BORE: Ø 145 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 pcs

APPROX. MACHINE HEIGHT: 3500 mm
APPROX. MACHINE WIDTH: 1150 mm
APPROX. MACHINE DEPTH: 1150 mm
DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm

PRE-FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER

LUBRICATION TYPE: Automatic (adjustable via screen)
RAM / BLANK HOLDER STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen
SYSTEM & PRESS STATUS INFORMATION: Viewable on screen
DIE MEMORY: Adjustable via screen

LINEAR POSITION SENSOR: NOVATECHNIK or TURCK
PLC SYSTEM: DELTA
TOUCH PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER

APPROXIMATE WEIGHT: 7.5 ton

Production Note
Hsdpfxox N Ulys Aghsg

This machine is manufactured by CRONOSSTECH in Turkey.

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.