Τύπου Η 150/50 τόνων υδραυλική πρέσα βαθείας έλξης

CRONOSSTECH CHSP 150/50

CRONOSSTECH CHSP 150/50

H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided

General Description

The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure provides maximum rigidity during the pressing process, maintaining stable parallelism and perpendicularity tolerances throughout the stroke.

The CHSP 150/50 model is designed for precise and repeatable deep drawing operations with a 150-ton main ram and a 50-ton lower blank holder (pot) capacity. The frame construction is stress-relieved by vibration for long-lasting and reliable operation.

⚙️ Standard Equipment

- Steel construction, 8-guide H-frame press body
- Vibration stress-relieved frame structure
- Bronze Zr14 slideway bearings
- TÜRK-AK accredited WPQR and WPS certified welding applications
(EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- Touch panel display (DELTA 7”)
- Adjustable ram and pot stroke control
- Adjustable ram and pot tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- Display of hydraulic unit oil temperature and system status on the screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components

📐 Technical Specifications – CHSP 150/50

Type: Steel construction, 8-guide H-frame press
Frame Material: St52 – ERDEMİR
Slideway Bearings: Bronze Zr14
Ram Capacity: 150 Ton
Pot Capacity: 50 Ton
Moving Table Dimensions: 1000 × 1200 mm
Fixed Table Dimensions: 1000 × 1200 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Ram Stroke: 600 mm
Pot Stroke: 200 mm
Min. Daylight: 100 mm
Max. Daylight: 700 mm
Stress Relieving: By vibration
Welding: WPQR and WPS certified by TÜRK-AK
EN ISO 15614-1/2017
(Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 18.5 kW – IE3
Main Pump: 32 cm³ – REXROTH or PARKER
Moving Table Fast Down Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Pot Table Forward Speed: 30 mm/s
Main Cylinder Bore: Ø280 mm – Ck45
Pot Cylinder Bore: Ø160 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 3650 mm
Approx. Press Width: 2950 mm
Approx. Press Depth: 2000 mm
Lower Table Height from Floor: 1250 mm
Pre-Fill Valve: NG 100
Hydraulic Unit: REXROTH or PARKER
Phedox N T U Hjpfx Aghja
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Sensor: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Panel: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approximate Weight: 11 Tons

Production Note

This machine is manufactured by CRONOSSTECH in Turkey.

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.