Μηχανική διπλοστήλη πρέσα έλξης

FAGOR TSE2-1000-4000-1600

Pressure: 1000 t
Distance between uprights: 4250 mm
Stroke: 400 mm
Control: SIEMENS S7-1500F
Table dimensions – longitudinal: 4000 mm
Table dimensions – transverse: 1600 mm
Total power requirement: 200 kW
Machine weight approx.: 250 t
Space requirement approx.: 7.5 x 4.8 x 7.4 m
This new FAGOR TSE2-1000-4000-1600 transfer press is available immediately!

DESCRIPTION:
New transfer press! Stored and never installed.
COMPLETE with electronic beam transfer, 0 – 800 mm transfer pitch and 500–1300 mm transfer bar spacing. Lifting stroke = 0–150 mm.
2 x T-slot sliding tables, extendable.
Ledpfx Aeym D E Aec Derh
Maximum total tool weight: 20,000 kg; upper part max. 10,000 kg.
Counterbalance for the ram weight with pneumatic cylinders.
Automatic pressure setting with setpoint input from tool memory.
Lubrication: Main bearings and gears are continuously lubricated via recirculating lubrication system.
LED tool area lighting. 2 auxiliary operator panels, scrap guides, press force measuring device, vibration-damping elements by KTI.

Technical Specifications:
Frame type: Transfer press
Drive type: Mechanical
Windows in side frames: Yes
Die-through hole in table: Yes
Sliding table: Yes
Number of tables: 2
Pressing forces:
Total rated force: 1000 t
Press table:
Clamping area (left-right): 4000 mm
Clamping area (front-back): 1600 mm
Height above floor: 600 mm
Automatic tool clamping system: Yes
Ram:
Stroke: 400 mm
Ram (mechanical press):
Ram adjustment: 300 mm
Strokes per minute min.: 8
Strokes per minute max.: 50
Hydraulic overload protection: Yes
Tool installation dimensions:
Tool installation height (stroke down, adjustment 766 mm)
Distance between uprights (left-right): 4250 mm
Free lateral passage (width): 1800 mm
Maximum tool weight: 20,000 kg
Transfer system:
Gripper rail inside width closed max.: 500 mm
Gripper rail inside width open max.: 1300 mm
Electrical connection data:
Total power consumption: 200 kW
Connected load: 350 kVA
Connection voltage: 400 V
Mains frequency: 60 Hz
Dimensions / Weights:
Space required – length: 7500 mm
Space required – width: 4800 mm
Height above floor: 7360 mm
Height below floor: 4000 mm
Total weight approx.: 250,000 kg
Additional press equipment:
Light barrier: Yes
Blanking shock absorber: Yes
Automatic tool clamping device: Yes
Hydraulic overload protection: Yes
Transfer device: Yes

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.