Οριζόντια πριονοκορδέλα

Kaltenbach KBS 750 DG

Kaltenbach KBS750 DG Bandsaw Line with T14 Transport System

Kaltenbach KBS 750 Double Mitre Horizontal Bandsaw with LS270 NC Length Stop and T14 Transport System, steel trade version – operation and programming via the control panel.

This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsaw machine, ideally suited for cutting structural steel such as horizontal H-beams, angle steel, channel steel, flat material, and rectangular tubes.

Semi-automatic twin-column bandsaw for cutting profiles up to 16 m in length with double mitre - pivoting device.

Technical Data

Cutting capacity: at 90° cut 750 mm × 500 mm

Laedpfxsy Rimuo Abpsb
+70°: 730 × 500 mm
–70°: 710 × 500 mm
+60°: 670 × 500 mm
–60°: 650 × 500 mm
+45°: 550 × 500 mm
–45°: 520 × 500 mm
+40°: 500 × 500 mm
+30°: 390 × 500 mm

Min. profile cross-section: 10 × 10 mm
Saw blade dimensions: 6990 × 41 × 1.3 mm, bimetal type M42, Z3/4
Drive power: saw with frequency control: 5.5 kW
Hydraulic unit (4.9 l/min): 1.5 kW
Cutting speed: 15–100 m/min, infinitely variable from the control panel
Feed rate: operational feed: 0–300 mm/min
Rapid feed and return: 2500 mm/min
Working height: 640 mm
Compressed air connection: 6–8 bar
Air consumption: 500 NL/min (in accordance with DIN 1342)
Saw weight: approx. 3200 kg
Saw dimensions: 3230 × 1160 × 2420 mm
Electrical: designed according to EN 60204-1
Power connection: 3 phase + N + PE / 50 Hz
Power consumption: 17 kVA
Fuse protection: 35 A

Machine Equipment Kaltenbach KBS 750 DG

Very robust twin-column guide for maximum precision
Inclined saw bow for higher performance and accuracy
Automatic table lowering during material transport
Infinitely variable speed control via frequency inverter
Hydraulic blade feed, manually adjustable
NC-controlled angle adjustment with absolute encoder
Automatic cycle: clamping – sawing – unclamping
Horizontal clamping device:
Fixed front stop, opposing clamping jaw via hydraulic cylinder
Manually adjustable pressure reduction
Vertical clamping device:
Positioned directly beside the blade; pressure manually adjustable
Play-free linear guides
Automatic blade guide adjustment
Automatic cutting pressure regulation
Remote diagnostics possible (telephone line required on the customer side)
Hydraulic blade tensioning with electronic monitoring
Automatic blade tension release during standstill
Automatic shutdown in case of blade breakage
Micro-spray system for clean operation and long blade life
Integrated swarf container
Separately driven swarf brush
Electronic slip monitoring
Hydraulic heating

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.