Κοκκοποιητής, κοκκοποιητής για πλαστικά

mütek MVZ 7,5 kW

Granulator MVZ 7.5 kW

Demonstration machine available at a special price

Our MVZ 7.5 Granulator is designed for shredding thin-walled plastic parts or for secondary shredding of wood chips. Additional details following a test run with your specific material.

Our cutting mills are used for size reduction of various materials such as plastics or wood. Both shredders and cutting mills are suitable for a wide range of shredding applications.

For example, defective parts and sprues at an injection moulding machine need to be recycled. At blow moulding machines, aside from rejects, also flash and startup pipes are processed. Materials suitable for processing include blow-moulding plastics like PET bottles, PE/PP bottles, canisters or buckets, and pipes.

Material is loaded from above via a hopper into the cutting chamber. Inside, the rotor is equipped with cutting blades. The material is shredded between the rotating blades and the stationary knives in the cutting chamber housing until it is reduced to the desired regrind size and passes through the screen located beneath the rotor. *Optional: The ground material is typically conveyed pneumatically into big bags, silos, or other containers.

The quoted price applies only to the granulation system as shown in image 1.
- Fan, cyclone, and filter are optional extras.

---
Technical data:

Granulator MVZ 7.5 kW
Motor: 7.5 kW
*Larger systems available upon request (4 to 75 kW)

Throughput up to 120 kg/h when shredding plastics *highly dependent on screen and material

Application example: Shredding PE 1000 plastic
Feedstock: approx. 40 mm chip length
After shredding: approx. 6 mm
Throughput up to 50 kg/h with 6 mm screen
(Throughput up to 80 kg/h with 8 mm screen)

___
For secondary shredding of G 30 wood chips, significantly higher throughput rates are attainable.
Up to max. 400 kg/h with a 10 mm screen.*with metered feeding, e.g., via conveyor belt or auger
Details after testing with approx. 30 kg of material.

Rotor diameter: 180 mm
6 rotor knives (each 225 mm)
Hfsdpfed N Dn Dsx Adgsh
4 stator knives (each 225 mm)
Dimensions: 930x730x1420 mm

Weight: 450 kg
Suction port: 100 mm
Screens: 5, 6, 8, 10, 12, and 15 mm – additional screens available on request

Price per screen: €390
Replacement blade set: €679

Suitable for e.g.:
- All types of plastic waste
Various materials – HDPE, LDPE, PP, PS, PC, PA

- Biomass
- Wood
- Herbs
etc.

Parts from injection moulding, blow moulding, sprue waste, small bottles, cables, small pipes, profiles, etc.

---
Larger systems are also optionally available:

Granulator MVZ / 18.5 kW
Throughput up to 350 kg/h *depending on screen and material
Opening: 620x400 mm
*optionally with matching extraction/conveying system

Granulator MVZ / 30 kW
Throughput up to 400 kg/h *depending on screen and material
Opening: 620x500 mm
*optionally with matching extraction/conveying system
---

For system configuration, please provide the following information:
- Length x width x height of input material?
- Screen size: to what final particle size in mm should it be reduced?
- Required throughput per hour in kg?
- Wall thickness in mm?
- Material description
Photos can also be helpful

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.