πριονοκορδέλα

MEBA - VOLLAUTOMAT MEBAeco 335 DGA 2300

Cutting diameter 335 mm
Saw blade length 4400 x 34 x 1.1 mm
Table height 750 mm
Feed stroke 5.0 - 2300 mm per stroke
Cutting area at 90 degrees: flat 500 x 335 mm
Cutting area at 45 degrees: round 330 mm
Cutting area at 45 degrees: flat 320 x 335 mm
Cutting area at 45 degrees: round, left 305 mm
Cutting area at 45 degrees: flat, left 305 x 335 mm
Cutting area at 30 degrees: round 180 mm
Cutting area at 30 degrees: flat 170 x 335 mm
Cutting speed 15 - 150 m/min
Max. workpiece weight 250 kg/m
Total power requirement 3.0 kW
Machine weight approx. 2550 kg
Space requirements approx. 4350 x 2300 x 1900 mm

Standard Equipment of the MEBAeco 335 DGA-2300:
- Access protection in accordance with CE regulations via light barrier
- MEBA automatic band saw in proven dual-column linear design
with integrated MEBA gripper feed from 5.0 - 2300 mm per stroke
- MEBA - Visualized program entry with CNC control
- Fully automatic operation for any angle setting from 30° - 135°, length and piece count
- Simple creation and management of up to 255 programs
- The operator enters the sawing application on the display interface based on a cut image. Input errors are minimized, and the straightforward creation of production orders by different operators is ensured.

MEBA High Performance Package:
- Saw feed through servo-controlled ball screw drive with automatic cutting pressure and feed rate monitoring. This ensures optimal conditions for each sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles.
- Fast and precise material length feed via rack and pinion with AC drive for a maximum stroke length of 2300 mm, with integrated roller conveyor up to 3000 mm
- Both sides opening of the clamping jaws of the gripper feed system
- Serrated rails for heavy-duty material handling
- Saw frame made from a solid, low-vibration steel welded construction
- Saw blade is inclined by 3° towards the material support surface for maximum cutting performance and blade life when cutting structural steel profiles.
- Combined saw blade guide
- Precision bearings for gentle deflection of the saw blade
- Chamfered carbide sliding guides for blade guidance
- Mitre pivot point (zero point) is the intersection between the saw blade and fixed clamping jaw, thus there is no change in length measurement when changing the angle setting.
- Automatic compensation of kerf width at every angle position
- NC angle programming at the control panel (these machines are generally free-standing)
Dodpfxoulnb De Abmjwc
- Patented double mitre clamping system (ERP No.): Automatic movement of the clamping fixtures. The material clamp automatically moves with the desired mitre in the flow direction, ensuring that the material is always clamped square and close to the saw blade. Material clamping is carried out with full-stroke cylinders.
- Rapid approach lowering of the saw frame via automatic height adjustment bar to just above the saw material. During serial cutting, the saw frame approaches only briefly above the material, allowing for fast positioning of new material sections
- Optimal cycle times for both single and serial cuts
- AC frequency-controlled saw blade drive, steplessly adjustable from 15 - 150 m/min
- Preloaded backlash-free, low-maintenance recirculating ball linear guides on the material feed...

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.