γεφυρωτός φρεζοκέντρος

MECANUMERIC MECA EASY 1510

CNC milling and engraving machine, MECANUMERIC MECA EASY 1510 – used - :

Gusdpfx Adozbybisgoc
Price ex-site: €23,500 (net)!

Manufacturer: MECANUMERIC
Model: MECA EASY 1510
Year of manufacture: 2015, former DEMONSTRATION MACHINE

Three-axis milling machine in flatbed portal design.
Travel range X-, Y-, Z-axes: 1,050 / 1,550 / 200 mm.
Table frame at portal: solid, stress-relieved, fully welded steel construction, powder-coated.
Heavy-duty table substructure designed to accommodate the VAC-CAISSON vacuum table, cassette-style, with 10 mm pitch air passage holes.
Feed rate:
300 mm/sec (18 m/min) in rapid and feed mode!
Linear guidance on rails, sliding blocks with integrated recirculating ball bearings.
Transmission: precision recirculating ball screws
Ball screw drives on all axes
Maintenance-free, brushless servo motors
(750 W on X and Y, 300 W on Z)
Repeat accuracy: +/- 0.025 mm
Mechanical resolution: 0.0006 mm
Numerical control: Mecanumeric CN 7000 ISO-G-Code
Machine operated via 10" touch screen display
Full CE conformity and declaration of compliance in accordance with the essential safety and health requirements

Vacuum table 1,020 x 1,500 mm
Worktable designed as a solid aluminum plate, with a 10 mm pitch matrix of vacuum holes.
The table is divided into 2 main zones, which can be switched manually.
Vacuum generation via (1) two-stage high-performance side channel blower. Motor power 4.5 kW, suction capacity 320 m³/h, filter and silencer included.
Due to total system size and possible heat generation, the pump is positioned outside the machine frame. The electrical control elements and circuit protection for pump and valves are integrated in the machine control cabinet or operator panel.

Milling spindle
HF40-ATC24
ENC
Conversion
Module
APSG-A
Vacuum generation via (1) two-stage high-performance side channel blower. Motor power 4.5 kW, suction capacity 320 m³/h, filter and silencer included.
Due to total system size and possible heat generation, the pump is positioned outside the machine frame. The electrical control elements and circuit protection for pump and valves are integrated in the machine control cabinet or operator panel.

High-frequency motor spindle 4kW
Power: 4 kW
Speed range: up to 24,000 rpm
Rapid tool change with pneumatic ejection, ISO30 taper
Tool holder: clamping diameter 2-16 mm
Cooling via compressed air 6 bar 20m³/h
Includes inverter and switching components.

Machine safety enclosure
Front with door and safety lock
- Position PROTCHOC not included -
Preparation of electrical control and switching elements as well as power socket for a high-performance industrial vacuum cleaner.
Tool changer
CH 6 S

Condition: good
Available: immediately
Location: Delmenhorst

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.