10°C έως +250°C / 749 λίτραMemmert Universal - Wärmeschrank
UFP 800
10°C έως +250°C / 749 λίτρα
Memmert Universal - Wärmeschrank
UFP 800
Κατάσταση
Μεταχειρισμένο
Τοποθεσία
Borken 

Προβολή φωτογραφιών
Εμφάνιση χάρτη
Στοιχεία για το μηχάνημα
- Περιγραφή μηχανήματος:
- 10°C έως +250°C / 749 λίτρα
- Κατασκευαστής:
- Memmert Universal - Wärmeschrank
- Μοντέλο:
- UFP 800
- Κατάσταση:
- πολύ καλή (μεταχειρισμένο)
Τιμή & Τοποθεσία
- Τοποθεσία:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Κλήση
Λεπτομέρειες προσφοράς
- ID Καταχώρησης:
- A213-11032
- Αριθμός Αναφοράς:
- 25068
- Τελευταία ενημέρωση:
- στις 24.02.2026
Περιγραφή
Memmert
Type: UFP 800
Basic Equipment of the Device
Electronic PID process controller with fuzzy logic support, featuring continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter 'Error Messages')
Language selection
Alphanumeric text display
Internal protocol memory with 1024 kB for storing actual temperature, set temperature, air turbine, air flap, and fault conditions with timestamp
Device operation and recording of actual values to MEMoryCard XL
Program sequence control for up to 40 ramp segments
Adjustable air turbine for forced air ovens (adjustable in 10% increments)
Servo-motor controlled air flap (adjustable in 10% increments) for operation with recirculating or fresh air
Integrated weekly timer with group function (e.g., all working days)
Retractable push/turn encoder for easy device operation
Visual alarm indicator
Built-in buzzer as alarm in case of threshold exceedance, as audible signal at program end, and for input confirmation (button click)
Digital monitoring controller for over-temperature, under-temperature, and monitoring following the set value (ASF)
Mechanical temperature limiter (TB safety class 1)
Monitoring relay for heater shutdown in case of fault
Two separate PT100 temperature sensors, DIN Class A, 4-wire type for control and monitoring
Convenient built-in 3-point temperature calibration
Temperature-dependent control cabinet and door ventilation
Parallel printer interface (PCL3 compatible)
Serial RS-232C interface for computer-aided temperature control programs and for reading out the controller's internal protocol memory
Technical Data:
Interior: made of rust-resistant stainless steel, highly stable and easy to clean due to deep-drawn ribbing.
Njdpfx Aceymnv Ee Djwc
Housing (outer body): structured stainless steel, rear wall made of galvanized sheet steel. UFP 800 mobile and lockable on wheels.
External dimensions: width 1190 mm, depth 750 mm, height 1620 mm
Internal dimensions: width 1040 mm, depth 600 mm, height 1200 mm
Volume: approx. 749 liters
Weight: approx. 170 kg
Power: 3N~ 400 V 50/60 Hz
Power consumption: approx. 4800 W 7A
Condition: used
Scope of delivery: (see picture)
(Specifications and details subject to change and errors!)
If you have further questions, we are happy to assist you by phone.
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Type: UFP 800
Basic Equipment of the Device
Electronic PID process controller with fuzzy logic support, featuring continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter 'Error Messages')
Language selection
Alphanumeric text display
Internal protocol memory with 1024 kB for storing actual temperature, set temperature, air turbine, air flap, and fault conditions with timestamp
Device operation and recording of actual values to MEMoryCard XL
Program sequence control for up to 40 ramp segments
Adjustable air turbine for forced air ovens (adjustable in 10% increments)
Servo-motor controlled air flap (adjustable in 10% increments) for operation with recirculating or fresh air
Integrated weekly timer with group function (e.g., all working days)
Retractable push/turn encoder for easy device operation
Visual alarm indicator
Built-in buzzer as alarm in case of threshold exceedance, as audible signal at program end, and for input confirmation (button click)
Digital monitoring controller for over-temperature, under-temperature, and monitoring following the set value (ASF)
Mechanical temperature limiter (TB safety class 1)
Monitoring relay for heater shutdown in case of fault
Two separate PT100 temperature sensors, DIN Class A, 4-wire type for control and monitoring
Convenient built-in 3-point temperature calibration
Temperature-dependent control cabinet and door ventilation
Parallel printer interface (PCL3 compatible)
Serial RS-232C interface for computer-aided temperature control programs and for reading out the controller's internal protocol memory
Technical Data:
Interior: made of rust-resistant stainless steel, highly stable and easy to clean due to deep-drawn ribbing.
Njdpfx Aceymnv Ee Djwc
Housing (outer body): structured stainless steel, rear wall made of galvanized sheet steel. UFP 800 mobile and lockable on wheels.
External dimensions: width 1190 mm, depth 750 mm, height 1620 mm
Internal dimensions: width 1040 mm, depth 600 mm, height 1200 mm
Volume: approx. 749 liters
Weight: approx. 170 kg
Power: 3N~ 400 V 50/60 Hz
Power consumption: approx. 4800 W 7A
Condition: used
Scope of delivery: (see picture)
(Specifications and details subject to change and errors!)
If you have further questions, we are happy to assist you by phone.
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένο μέλος από το: 2012
Υποβολή αιτήματος
Τηλέφωνο & Φαξ
+49 2861 ... αγγελίες
Αυτές οι αγγελίες μπορεί επίσης να σας ενδιαφέρουν.
Μικρή αγγελία
Borken
1.833 km
10°C έως +250°C / 749 λίτρα
Memmert Universal - WärmeschrankUFP 800
Memmert Universal - WärmeschrankUFP 800
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα
























