μηχάνημα κοπής πλάσματος

Microstep Mastercut Eco Plus 3001.15

Microstep Mastercut Eco Plus 3001.15
Year of manufacture: 2017
Control: IMSNC
Cutting table: 3000 x 1500 mm
Extraction channel: left / right
Plasma source: Kjellberg Hi Focus 161i, adjustable 10–160 A

Power Source HiFocus 161i PLUS
• Flexible adjustment of the cutting process to required conditions via soft-switch inverter and microprocessor control
• Optimal process control thanks to very fast regulation of the cutting current
• Monitoring of the process sequence for torch cooling, ignition time, pilot arc time, short circuit time at torch ignition and power source
• Operating status and fault display via LED and display
• Analog and serial interface for adaptation to CNC controllers
• Infinitely variable setting of the cutting current from 10 to 160 A, and for marking from 5 to 25 A
• Optimal piercing through continuously adjustable delay for the main arc and adjustable current ramp-up
• Adjustable current reduction at corner, start, and end signals from the guiding system
• Automatic display of preset cutting current
• Serial data transmission for PC-based diagnostics

Plasma Cutting Technology Contour Cut
• Advanced HiFocus technology for mild steel
• Optimized for cutting fine internal and external contours
• High cutting quality and contour accuracy
• Holes with angular deviations according to DIN EN ISO 9013 within the range of 2–4
• Low angular deviations and smooth cut surfaces
• Excellent repeatability and dimensional accuracy
• No time-consuming post-processing – high productivity and low costs
• No additional equipment, software, or new consumables required
• Standard equipment

Plasma Torch PerCut 200/210
• PerCut 200 plasma torch for standard applications and high-precision bevel cutting
• PerCut 210 quick-change torch with threaded lock for fast and convenient torch changes
• Special torches available for special applications
• Higher cutting speeds reduce cost per meter
• Long service life of consumables conserves resources
• Narrower kerf thus fewer emissions and less waste
• Significantly lower gas consumption compared to competitors due to efficient liquid cooling up to the nozzle tip
• Lower noise level due to reduced gas consumption
• Bevel cutting up to 50 degrees using standard consumables
• Cutting and marking with the same consumables

Power Source HiFocus 161i
Power supply: 400 V; 3-phase; 50 Hz
Max. input power: 28 kVA (100% duty cycle)
Main fuse, slow-blow: 50 A
Protection: IP 22
Open circuit voltage: 330 V
Cutting current: 10–160 A (100% duty cycle)
Marking current: 5–25 A (100% duty cycle)
Cutting range: max. 50 mm, recommended 0.5–38 mm
Max. piercing thickness: 30 mm
Fpodpfx Aey Nd Hysf Ssh
Weight: 206 kg

Plasma Torch PerCut 200
Quick-change torch PerCut 210
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, air, N2/H2 (F5)

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.