Διαθλασίμετρο ακτίνων Χ (XRD)PANalytical
X’Pert PRO MPD
Διαθλασίμετρο ακτίνων Χ (XRD)
PANalytical
X’Pert PRO MPD
σταθερή τιμή συν ΦΠΑ
13.500 €
Κατάσταση
Μεταχειρισμένο
Τοποθεσία
Borken 

Εμφάνιση εικόνων
Εμφάνιση χάρτη
Στοιχεία για το μηχάνημα
- Ονομασία μηχανήματος:
- Διαθλασίμετρο ακτίνων Χ (XRD)
- Κατασκευαστής:
- PANalytical
- Μοντέλο:
- X’Pert PRO MPD
- Κατάσταση:
- μεταχειρισμένο
Τιμή & Τοποθεσία
σταθερή τιμή συν ΦΠΑ
13.500 €
- Τοποθεσία:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Καλέστε
Λεπτομέρειες προσφοράς
- Αναγνωριστικό αγγελίας:
- A195-31791
- Αριθμός αναφοράς:
- 24688
- Ενημέρωση:
- τελευταία στις 10.07.2025
Περιγραφή
PANalytical
PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD)
Excerpt from the service report:
Device: PANalytical X’Pert PRO MPD
Date: 07/07/2021
Performed works:
- Reinstallation and commissioning of the system
- Connection of external supply lines
- Warm-up phase
- Complete alignment of goniometer and additional components
- Maintenance carried out incl. replacement of defective parts
Spare parts used:
L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD
FAN FOR X-CELERATOR UNIT FAN
FILTER FILTER, WATER
Motor PW3050
(Note: “Device not tested at our facility”)
Dodpjwycatjfx Afkocd
The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) for the structural characterization of crystalline materials. Perfect for pure research as well as for routine applications in industry and academia. Thanks to its modular design, rapid detection, and temperature and atmosphere control, it is ideally suited for both routine analyses and complex in-situ experiments.
Key features:
Various measurement geometries are possible:
- Reflection in Bragg-Brentano (θ–2θ) mode
- Transmission geometry for powders in capillaries
- Optionally also SAXS (Small-Angle X-ray Scattering) for nanostructures
Radiation source and detectors:
- Usually copper anode (Cu-Kα, λ ≈ 1.54 Å)
- X’Celerator detector (1D, ultra-fast) for parallel data acquisition
Modular system with PreFIX technology:
- Fast exchange of optics and sample stages without recalibration
In-situ measurements at high temperatures:
- Measurements possible up to approx. 1200°C
- Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmosphere)
Typical applications:
- Phase analysis and quantitative Rietveld evaluation
- Determination of crystallite size, microstrain, residual stresses
- In-situ investigation of phase transitions, oxidation, crystallization, etc.
- SAXS measurements for analysis of nanoparticles and pore structures
- Wide sample spectrum: powders, thin films, ceramics, pharmaceuticals, catalysts, and more
Technical data (typical):
Property & Specification
Angular range (2θ): approx. 0.5° to 150°
Step size: up to 0.002° or finer
Goniometer: vertical, 0–0, radius approx. 240 mm
Temperature range: room temperature up to approx. 1200 °C
Atmosphere: air, N₂, O₂ (limited reducing atmosphere)
Detectors: X’Celerator (1D), proportional counter
Distribution & fields of application:
The X’Pert PRO MPD is in use worldwide, e.g. at:
- Universities (ETH Zurich, TU Dresden, University of Vienna)
- Research institutes (e.g. Max Planck Institutes, ICN2, IS2M)
- Industry (e.g. materials development, pharma, chemistry)
Condition: used
Scope of delivery: (see image)
(Specifications and technical details are subject to change and error!)
If you have further questions, we will be happy to answer them by phone.
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD)
Excerpt from the service report:
Device: PANalytical X’Pert PRO MPD
Date: 07/07/2021
Performed works:
- Reinstallation and commissioning of the system
- Connection of external supply lines
- Warm-up phase
- Complete alignment of goniometer and additional components
- Maintenance carried out incl. replacement of defective parts
Spare parts used:
L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD
FAN FOR X-CELERATOR UNIT FAN
FILTER FILTER, WATER
Motor PW3050
(Note: “Device not tested at our facility”)
Dodpjwycatjfx Afkocd
The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) for the structural characterization of crystalline materials. Perfect for pure research as well as for routine applications in industry and academia. Thanks to its modular design, rapid detection, and temperature and atmosphere control, it is ideally suited for both routine analyses and complex in-situ experiments.
Key features:
Various measurement geometries are possible:
- Reflection in Bragg-Brentano (θ–2θ) mode
- Transmission geometry for powders in capillaries
- Optionally also SAXS (Small-Angle X-ray Scattering) for nanostructures
Radiation source and detectors:
- Usually copper anode (Cu-Kα, λ ≈ 1.54 Å)
- X’Celerator detector (1D, ultra-fast) for parallel data acquisition
Modular system with PreFIX technology:
- Fast exchange of optics and sample stages without recalibration
In-situ measurements at high temperatures:
- Measurements possible up to approx. 1200°C
- Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmosphere)
Typical applications:
- Phase analysis and quantitative Rietveld evaluation
- Determination of crystallite size, microstrain, residual stresses
- In-situ investigation of phase transitions, oxidation, crystallization, etc.
- SAXS measurements for analysis of nanoparticles and pore structures
- Wide sample spectrum: powders, thin films, ceramics, pharmaceuticals, catalysts, and more
Technical data (typical):
Property & Specification
Angular range (2θ): approx. 0.5° to 150°
Step size: up to 0.002° or finer
Goniometer: vertical, 0–0, radius approx. 240 mm
Temperature range: room temperature up to approx. 1200 °C
Atmosphere: air, N₂, O₂ (limited reducing atmosphere)
Detectors: X’Celerator (1D), proportional counter
Distribution & fields of application:
The X’Pert PRO MPD is in use worldwide, e.g. at:
- Universities (ETH Zurich, TU Dresden, University of Vienna)
- Research institutes (e.g. Max Planck Institutes, ICN2, IS2M)
- Industry (e.g. materials development, pharma, chemistry)
Condition: used
Scope of delivery: (see image)
(Specifications and technical details are subject to change and error!)
If you have further questions, we will be happy to answer them by phone.
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένος από: 2012
Αποστολή αιτήματος
Τηλέφωνο & Φαξ
+49 2861 ... αγγελίες
Αυτές οι αγγελίες μπορεί επίσης να σας ενδιαφέρουν.
Μικρή αγγελία
Borken
1.833 km
Ηλεκτρονικό μικροσκόπιο σάρωσης (PC-SEM)
JeolJSM-6490 Bruker XFlash Detektor
JeolJSM-6490 Bruker XFlash Detektor
Μικρή αγγελία
Mainz
1.618 km
ηλεκτρονικό μικροσκόπιο σάρωσης (REM)
ZeissXB 350
ZeissXB 350
Μικρή αγγελία
Freising
1.313 km
Ηλεκτρονικό μικροσκόπιο σάρωσης (επιτραπέζιο)
JEOLJCM-7000
JEOLJCM-7000
Μικρή αγγελία
Freising
1.313 km
Ηλεκτρονικό μικροσκόπιο σάρωσης εκπομπής πεδίου
JEOLJSM-IT800is
JEOLJSM-IT800is
Μικρή αγγελία
Duxford
2.209 km
Φασματόμετρο μάζας Bruker Maldi-Tof Microflex
BrukerMicroflex
BrukerMicroflex
Μικρή αγγελία
Borken
1.833 km
Θάλαμος κλιματικών δοκιμών
VötschVCS 7034-5
VötschVCS 7034-5
Μικρή αγγελία
Borken
1.833 km
Θάλαμος δοκιμών κλίματος χωρητικότητας 11.000 λίτρων (11 m³)
CTSCW-60/11 -60°C bis +90°C
CTSCW-60/11 -60°C bis +90°C
Μικρή αγγελία
Borken
1.833 km
Κλιματικός θάλαμος δοκιμών +20 έως +130°C, 240 λίτρα
Weiss TechnikEmissionEvent VOC/240
Weiss TechnikEmissionEvent VOC/240
Μικρή αγγελία
Duxford
2.209 km
Αντλία ανιχνευτή αερίων Drager Accuro
DragerAccuro
DragerAccuro
Μικρή αγγελία
Eindhoven
1.875 km
Σύστημα ελέγχου φυσαλίδων / ανιχνευτής διαρροών
TRIO-TECH InternationalG-233F | G-203
TRIO-TECH InternationalG-233F | G-203
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα




























































































































