υδραυλική πρέσα

TJF-GARNET FDM-150

Hydraulic double-column press equipped with two lateral cylinders connected by a plate for pre-pressing and pressing rotors and stators, and a central cylinder for mandrel extraction and rotor shaft fitting, as well as for shaft removal in case of repair. Features a retractable table for stacking and handling rotors and stators.

MAIN CYLINDERS 150 TONS

- 2 hydraulic cylinders, each with 75 tons of capacity and a stroke of 750 mm, joined by a slotted plate with a central 250 mm diameter bore.
- Maximum usable height to cylinder plate: 1,300 mm.
- Minimum usable height to cylinder plate: 550 mm.
Lrodpfx Aloxc Ekdjpsk

EXTRACTION CYLINDER

- 1 central cylinder with 80 tons of capacity and a 1,200 mm stroke.
- Prepared for mounting an extraction clamp, ram rod end threaded at M 35.150 with 40 mm length.
- Maximum usable height to extractor cylinder: 1,300 mm to the base of the rod thread.
- Minimum usable height to extractor cylinder: 100 mm to the base of the rod thread.

TABLE AND FRAME

- Mechanically traversing slotted table, 1,200 x 800 mm, 600 mm travel, equipped with a worm gear reducer and 0.5 hp electric motor with brake.
- Central bore in the table: 250 mm diameter, max depth of 550 mm.
- Table lifting capacity for travel: 4 tons.
- Travel speed: 2,600 mm/min.
- Internal front width: 1,250 mm.
- Working height: 600 mm.

HYDRAULIC POWER UNIT

- Dual-speed hydraulic power unit with 5.5 hp motor, automatic disengagement from rapid speed, and independent speed settings. Maximum pressure: 250 bar.
- Digital adjustment of maximum force for pre-pressing, pressing, and fitting operations; digital tonnage indicator. Pressure regulation using proportional valves.
- Selector for approach and measurement speeds.

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.