φρέζα κρεβατιού

TOS KUŘIM FS 100 OM A4 CNC

The machine is currently disassembled and is undergoing an overhaul with the following scope:

- Complete disassembly and cleaning
- Inspection of all components
- New Tribotec lubrication unit
- Overhaul of the separate console balancing circuit
- Milling head "O" – full overhaul including replacement of gear wheels
- Replacement of gearbox bearings
- Replacement of drive belts
- Repair of ball screws and their housings
- Resealing of all hydraulic circuits on the machine and replacement of solenoid valves
- Addition of automatic lubrication for gears in the milling head
- Resealing of all hydraulic cylinders and upgrade of sealing elements
- Overhaul of hydraulic power unit
- Overhaul of Indramat feed motors and the spindle motor
- Repair and adjustment of Indramat drives
- Overhaul of the electric control cabinet with all control elements
- Replacement and modernization of the end switches throughout the machine
- Repair or replacement of cabling for the Heidenhain i TNC 426 system
- Refurbishment of the control panel
- Overhaul of the Heidenhain i TNC 426 control system including keyboard and display unit
Gkodpfxjxnkkae Ad Hec
- The machine will be fully functional and geometrically precise, verified by a test report
- New machine painting in RAL 5005 and RAL 9010 color scheme

Technical data of the machine

Maximum spindle torque: 1200 Nm
Maximum feed force in X, Y, Z axes: 20,000 N
Maximum workpiece weight: 9,000 kg
Total table area: 1000 x 4000 mm
Number of T-slots/groove spacing: 7/140
T-slot width: 24H7 mm
Table height from base: 900 mm
Longitudinal travel "X": 4000 mm
Transversal travel "Y": 1000 mm
Vertical travel "Z": 900 mm
Minimum horizontal spindle axis distance from table clamping surface: 150 mm
Maximum horizontal spindle axis distance from table clamping surface: 1500 mm
Minimum vertical spindle nose distance from table clamping surface: 130 mm
Maximum vertical spindle nose distance from table clamping surface: 1030 mm
Horizontal spindle nose distance from table edge (inner): 80 mm
Vertical spindle axis distance from table edge (inner): 100 mm
Spindle taper: ISO 50
Clamping mechanism pull force: 16,100 N
Horizontal spindle rotation – both directions: 180°
Vertical spindle rotation – both directions: 180°
Spindle head ... indexable in 2.5° increments
Usable main drive motor power: 22 kW
Spindle speed range: 11 to 2500 rpm
Number of speed steps: stepless
Feed rate range: 1 to 5000 mm/min
Rapid traverse (Y, Z): 10 m/min
Rapid traverse (X): 10 m/min

Machine available for delivery at the end of 2025.

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.