Αντλία κενού υγρού δακτυλίου Κράμα 59

BUSCH 7,5 kW ; 195m³/h ; 33mbar Dolphin LC 0220 A ZZO XX ZZ

1 liquid ring vacuum pump.
Please read the description carefully all the way to the end!!

The pump is NOT suitable for:
Water, food industry applications, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are more suitable.

Attention!!
The pump does not have explosion protection certificates.
It is also not possible to change the motor, as it is a special long-shaft motor.
The mechanical seal also has NO EX certificates!

The pump is made from the special alloy Alloy 59!!
This alloy is used when conventional chromium-nickel steels no longer provide sufficient corrosion resistance, especially in cases where chloride-induced pitting and crevice corrosion and stress corrosion cracking are problematic.

Alloy 59 is used in: environmental engineering, chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Predominantly, 2.4605 is used in the chemical industry, pulp and paper industry, and flue gas desulfurization plants.

Excellent resistance to mineral acids such as nitric, phosphoric, sulfuric and hydrochloric acid, and particularly to sulfuric/hydrochloric acid mixtures.

Typical applications include:

- Plant components for organic chemical processes with chloride-containing media, especially when chloride-based catalysts are used
- Multipurpose systems in the chemical industry
- Plant parts in the fine chemicals and pharmaceutical industry
- Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulfurization systems (FGD) in fossil-fueled power plants and waste incineration plants
- SO2 scrubbers for marine diesel engines
- Components for seawater and concentrated brines
- Equipment and components for geothermal and sour gas applications
- Reactors for acetic acid and acetic anhydride
- Reactors for hydrofluoric acid
- Sulfuric acid coolers
- Piping in geothermal power plants
- Components in flue gas desulfurization units

Manufacturer: Busch
Model: LC 0220 A ZZO XX ZZ
Volume flow: 195 m³/h
Motor power: 7.5 kW
Voltage: 400/690 Volt
Speed: 1440 rpm
Vacuum: 33 mbar
Material: 2.4605 (Alloy 59) NiCr23Mo16Al
All bearings replaced, mechanical seal professionally overhauled.
Weight: 121 kg
Iajdpfoigqutsx Aifjr
Dimensions: Length 960 mm, Width 370 mm, Height 370 mm
Connection: DN 50 (2")

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.