ταινιοπρίονο

CORMAK BS912N

BAND SAW CORMAK BS912N

Specification:

- The material to be cut can be fed manually or with any mechanical device. The feed of the tool, however, is automatic.
- The descent speed of the saw arm is regulated by a hydraulic cylinder. The desired descent speed is achieved through a valve that controls oil flow between the cylinder chambers.
- The desired linear speed of the blade is obtained by changing the pulley transmission ratio between the worm gearbox and the drive motor. The coolant tank with an electric pump is located in the base.
- Precision and robust workmanship put this bandsaw at the forefront of machines in its class, offering high cutting capacity of up to 230 mm, as well as angle cutting from 0 to 45 degrees.
- The CORMAK BS912N bandsaw, thanks to innovative upgrades and the use of high-quality bimetal blades from a renowned brand, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are critical.
- The cutting angle is set by a rotary vise in the range from 0 to 45 degrees.
Hodpfxjy En E Se Adqjl
- The vise walls are made of durable cast iron. An angle scale at the back of the vise allows for quick and convenient adjustment of the cutting angle.
- Both blade guides are equipped with a cooling system delivering coolant to the blade and the workpiece.
- This model features a convenient blade tension handle and a quick-release vise for fast clamping of the workpiece.
- The machine arm has a blade tension indicator and a selection table for blade tooth pitch and cutting speed, depending on the steel grade being cut.
- In the lower arm position (after completing the cut), the blade drive is automatically switched off via a new-generation limit switch.
- Cutting process safety is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops the machine after cutting, an emergency stop button ("mushroom safety switch"), and a full set of micro-switches that disconnect the machine if, for example, the belt drive guard or blade guard is opened.
- Additionally, this model is equipped with a wire brush for cleaning chips from the blade, preventing clogging and ensuring more efficient cutting.
- The blade guides are fitted with special carbide inserts and bearings, which have a significant impact on blade tracking, longevity, straightness, accuracy, and cutting quality.
- Carbide guides considerably reduce wear on both the machine and the blade itself!
- The arm, made from profiled ductile cast iron, ensures rigidity during operation and absorbs all types of vibrations.
- The control panel is located on the arm of the band saw.

Technical Data

Motor:
230V~, 50Hz, 1100W

400V~, 50Hz, 1100W

Blade dimensions: 2655x27x0.9 mm

Blade speeds: 24/36/49/71 m/min

Miter cutting range: 0 to +45 degrees

Machine packing dimensions: 1420x500x1150 mm

Weight: 151/202 kg

ENGLISH MANUAL

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.