Οριζόντιο κέντρο κατεργασίας SH50

MORI SEIKI SH-50

We offer this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996.

Model designation: SH-50
Serial number: 450

The machine is still under power and is available at short notice.

• P8 Power Supply worth €1,500 was renewed only in August 2024
• The spindle was repaired in 2017 and has since mainly been operated in single-shift, as we primarily produce individual parts and small series, meaning the machine has mostly been used for setup operations

• Machine: Milling machine Mori Seiki SH-50
• Control: Fanuc MSX-516
• Year of manufacture: 1996
• Configuration: Horizontal milling machine with indexing table
• Tool capacity: 60 (BT40)
• Number of pallets: 2 (500mm x 500mm)
• Travel paths: X 630mm, Y 600mm, Z 650mm
• Spindle speed: 12,000 rpm
• Chip conveyor

Known defects:
Rapid traverse in X-axis has been reduced by 20% to increase telescopic cover lifespan.
The sealing ring during pallet change is likely defective, causing oil leakage. As a temporary solution, we installed a ball valve; when pallet change is required (which is infrequent), the valve must be opened.

The machine is sold as inspected, with no warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law.
Pgodpfjyt Nnpjx Adqsk

If you have any questions or require further information, please feel free to send us a message or call us.

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.