Υδραυλική πρέσα μονής κολώνας με μαξιλάρι έλξης, υδραυλική πρέσα έλξης, πρέσα βαθιάς έλξης, πλαίσιο

RÖCHER REP 100.01 SZ

Single-column hydraulic press with draw cushion RÖCHER type REP 100.01 SZ
Hydraulic drawing press
Machine no. 15.499 Year of manufacture: 2003
Pressing force: 100 tons
Ram stroke: 500 mm
Throat depth: 370 mm
Installation height: 600 mm
Table surface: 850 x 700 mm with drop-through hole Ø 150 mm
Ram surface: 700 x 600 mm
Ram ejector force: 16 tons (160 kN)
Ram ejector stroke: 100 mm
Ram ejector with internal thread M24 x 1.5 mm
Draw cushion force: 40 tons (400 kN)
Draw cushion stroke: 200 mm
Draw cushion surface: 530 x 530 mm
Pressure holding time: 0 to 90 sec.
Table height above floor: 910 mm
Hydraulic operating pressure: max. 300 bar
Hydraulic tank capacity: 700 liters
Rapid approach speed: approx. 400 mm/sec
Press speed up to 23.8 tons (238 kN): 5 to 68 mm/sec
Press speed up to 100 tons (1000 kN): 5 to 16 mm/sec
Return speed: 50 to 400 mm/sec
Main pump drive power: 18.5 kW
Auxiliary pump drive power: 4 kW
Mains connection: 400 Volt, 50 Hz (63 Ampere)

- Operation and programming via PC 670 Touch Panel control panel, keyboard and mouse
- Machine control via SIEMENS S7-300 PLC
- Ram stroke and pressing force programmable via the controller
- Draw cushion with drawing and ejector function
- Draw cushion force steplessly adjustable
- Ram and draw cushion equipped with direct travel measuring system
- Draw cushion can be moved into and out of the press area for punching operations using the drop-through hole
- Floor-level installation, draw cushion does not extend into the floor
- Pressure and position cut-off
Gsdpsyupuljfx Afwsip
- Fixed stop with indirect measuring system
- Pressure holding time steplessly programmable
- Table surface with holes for draw cushion ram rods
- Ram with ejector
- Cutting shock absorption
- Stroke release via two-hand operation, foot switch, manual lever and button on the control panel
- LEUZE light curtain as reach-in protection for safe operation
- Front mirror columns on the press table laterally adjustable
- Electrical control cabinet mounted on machine frame
- Hydraulic oil cooler with fan motor (oil-air cooling)
- Manual central lubrication pump
- 2x hose lines for tool tempering or cooling at the ram
- Piece counter integrated in the control system
- 306 recorded operating hours
- Operating manual, hydraulic diagram and electrical diagram available

Space requirements L x W x H: 3100 x 1800 x 4160 mm
Weight: approx. 13 tons

Very good, as-new condition

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.