πρέσα συνένωσης δακτυλιοειδούς ζεύξης (Keilzinkpresse)

DIMTER DKV III Speed max. 80 m/min

DKV III Continuous Press with Braking Unit
Completely overhauled
Optionally available with original hydraulic motors or converted to servo motors
Options:
- Chain threading system
Kodpfxjv T Aqye Afnsww
- Travelling cross-cut saw

Function:
For continuous pressing of finger joints without stopping (in through-feed operation).
The upper and lower plate chains generate the feed force.
Downstream brake plates transmit the necessary longitudinal pressing force to the timber via friction.

Advantages:
- High performance despite relatively low feed speed
- Absolutely no vertical finger misalignment at finger joints

Technical features:
Heavy-duty 2" plate chain, pneumatically raise/lowerable
Floating brake elements
Pressing force measured via contact pressure gauge
Height adjustment electric

Maximum pressing force adjustable and dependent on feed speed and timber cross-section:
4500 daN at 32 m/min
2200 daN at 70 m/min

Feed speed adjustable: 10–70 m/min
Drive power:
Adjustment of infeed unit: 1 kW
Brake adjustment: 1 kW
Hydraulic motors: 45 kW

Technical specifications:
Timber width: 90–180 mm
Timber thickness: 20–80 mm
Ratio thickness to width: 6:10

Timber cross-section with 15/16.5 mm fingers: max. 90 cm²

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.