Μηχανή συγκράτησης άκρων

Hebrock AKV 3006 DK-F

AKV 3006 DK-F

1 pc. Edgebander AKV 3005 DK-F with jointing unit, including DIA tools
Jointing thickness up to 40 mm
Workpiece thickness up to 3 mm
Combination milling unit radius R 2.5 mm
Technical description:
With hot melt adhesive application to the workpiece for edge material up to 3 mm
60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit
Maintenance-free, coated glue pot
HF cross-cut station (16,000 rpm) for front and rear edge overhang
HF milling station (16,000 rpm) with interchangeable knife cutter (combination version) and fine adjustment from operator side
Free spaces for additional processing units (Hebrock system)
Feed speed approx. 10 m/min
Cutting depth adjustment for cross-cut saw
Signal lamp for workpiece sequence
Robust chain drive
Ergonomically arranged control panel
Double roller top pressure beam
Viewing window for units from the rear and operator side of the machine
PLC control including touchscreen

Technical Data:
- Feed rate 10 m/min
- Panel thicknesses from 8 to 40 mm
- Weight: depending on equipment approx. 1550 kg
- Dimensions (L x W x H) 5250 x 1445 x 1600 mm

Airtronic including cooling and anti-static spraying unit, 2014

1 pc. Hot air unit for producing the optical zero joint using designated special edge materials
- Including pneumatic glue pot positioning
- Including cooling and anti-static spray unit
- Including 2 additional quick-change edge channels
- Including special version for corner rounding cutter
Max. workpiece thickness: 60 mm; min. workpiece length: 200 mm
Exclusively for Hebrock edgebanders of the 3000 series
Retrofitting possible later (additional costs on request)
- Technical data:
Max. panel thickness 40 mm
Max. edge thickness 1.2 – 2.0 mm
7 – 10 m/min feed rate
Air consumption approx. 280 – 580 l/min (Airtronic only), electronically controlled
Ready for operation after approx. 2 min

Special version, minimum workpiece thickness 8 mm

1 pc. Airtronic retrofit for PLC machines on request

1 pc. Retrofit possible only at the Hüllhorst – Oberbauerschaft plant

Upgrade to 8 mm edge thickness
1 pc. Up to max. 40 mm workpiece thickness, including pneumatic saw adjustment
Dksdpfx Aaoxl Rmcscsu

Special infeed fence for overlaid panels
1 pc. 16 mm and 19 mm thickness
Maximum overlay projection 8 mm

Separate pneumatic milling adjustment
1 pc. Controllable from control panel (straight/radius)

Polishing station (buff)
1 pc.

Corner rounding cutter
1 pc., incl. combination tool and pneumatic adjustment chamfer/radius
Maximum workpiece thickness 40 mm
Minimum workpiece length 300 mm
Radius R 2.0 mm

Ball bearing for corner rounding cutter, 24.1 mm, 1 pc.
Ball bearing for corner rounding cutter, 24.2 mm, 1 pc.

Corner rounding cutter for 60 mm workpiece thickness, 1 pc.
Quick-change device for corner rounding cutter, 1 pc.

Replacement motor 0.37 kW for corner rounding unit, 1 pc., including terminal box with mounted electrical connection, two pneumatic quick couplings, motor plate, and short-stroke cylinder or alternatively, cycle counter, including cutter R 1.0 mm

Ball bearing 24.1 mm for corner rounding cutter, 1 pc.
Ball bearing 24.2 mm for corner rounding cutter, 1 pc.

Radius scraper, 1 pc., incl. pneumatic lift device, radius R 2.0 mm
Radius scraper, 1 pc., incl. pneumatic lift device, radius R 1.0 mm

Flat scraper, 1 pc., with pneumatic use control

Glue station changeover system, including glue outlet downward preparation, 1 pc., without 2nd glue pot – in

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.