Κέντρο επεξεργασίας CNC

Holzfraese HP 1890

Used machine

Year of manufacture: 2019

Only 110 operating hours!

Features and technical data:

X = 1800 mm
Y = 900 mm
Z = 80 mm

Constructed from 18 mm Koskisen boards, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis.

Milling bed made of 19 mm MDF as a sacrificial board with guide rails and T-slot nuts for clamping.

Base frame with reinforcements, filled with polymer concrete, prepared for transport by pallet truck or forklift.

Mechanical set consisting of linear guides incl. guide carriages, as well as 2010 and 1605 ball screws for all axes.

Shaft couplings and high-performance grease for lubricating the individual carriages, as well as cable carriers incl. connection sets.

Control set comprising a Triple Beast controller for controlling 3 axes, with Ethernet connection.

Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as a 48 V, 6.7 A switched-mode power supply, LED board for breakout board, ribbon cables and proximity sensors, small parts such as wire leads, ferrules, control cable, heat shrink tubing, and cable lugs.

Fully installed in an aluminum enclosure including electrical kit and emergency stop.

21.5 inch monitor as built-in monitor, incl. mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, plus mouse and keyboard, pre-installed in an ergonomic console.

Tool length sensor for determining tool length and changing the active zero offset.
Hsdpfjw Nadysx Acfjfh

Special equipment:

High-frequency spindle with 2.2 kW, incl. clamping nut, frequency converter, line filter, braking resistor, and collet set.

PC with 8 GB RAM and AMD processor

CAD software Rhino 5.0 for creating both simple 2D data as well as 3D solid models

Availability: short notice
Stock location: Flörsheim

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.