IMA NOVIMAT I /G80/390/R3

IMA NOVIMAT I /G80/390/R3

This IMA NOVIMAT I /G80/390/R3 edge banding machine was manufactured in 2013. It is equipped with two 4.5 kW motors running at 150 Hz, enabling speeds of up to 9,000 rpm. With an edge height of 14 to 65 mm and a maximum coil diameter of 850 mm, it is ideally suited for precise edge banding applications. Take advantage of the opportunity to purchase this IMA NOVIMAT I /G80/390/R3 edge bander. Contact us for more information about this machine.

Additional Information

• Motor power: 2 x 4.5 kW, 150 Hz
• Motor speed: 9,000 rpm
• Power supply: 230 V
• Heating capacity: 6 x 500 watts
• Adjustment range: Vertical approx. 17 mm, Horizontal approx. 30 mm
• Stroke: Max. 8 mm
• Coil diameter: Max. 850 mm
• Edge height: 14 - 65 mm
• Workpiece overhang: Min. 30 mm + edge thickness, Max. 80 mm including edge thickness
• Workpiece length: Min. 130 mm
• Workpiece gap: Min. 300 mm
• Workpiece spacing: Min. 990 mm
Gsdpfx Aex D Nh Ajg Aebi
• Workpiece thickness: Min. 8 mm, Min. 12 mm with tracing wheel, Max. 80 mm
• Single tracing workpiece overhang: Min. 30 mm
• Double tracing system workpiece overhang: Min. 38 mm for up to 4 profiles, Max. 50 mm
• Cutterhead diameter: 125 mm
• Motor shaft: 30 x 68 mm diameter
• Internal thread: M16, left or right depending on the motor
• Cutting cross-section motor power: 0.20 kW, 200 Hz 400 V, 12,000 rpm for max. 195 mm²; Option: 0.66 kW, extension up to max. 1,100 mm²
• Tool diameter: 160 mm / 48 teeth
• Swivel range: 0 and 25 degrees
• Workpiece feed speed: Max. 30 m/min at an edge cross-section of 3 x 45 mm
• Edge overhang: Upper edge max. 3 mm, lower edge max. 2 mm for straight edges
• Edge material: Edge max. 4 mm for wood and plastic; aluminium max. 3 mm

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.