Ανοιχτό ημιρυμουλκούμενο με μουσαμά

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, 1st axle lift, lifting roof, Vario Hole-FIX chassis, BPW axles, pallet stop strips left and right, sliding side curtain, sliding roof cover, toolbox, first owner, as new condition.

Permissible fifth-wheel load: 12,000 kg
Technically possible fifth-wheel load: approx. 12,000 kg
Permissible aggregate load: 24,000 kg (8,000 kg per axle)
Technically possible aggregate load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Unladen weight (standard spec): approx. 6,130 kg
Unladen weight (individual vehicle spec): approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load rating according to DIN EN 283 with test axle load of 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
Hnedsyuzvbjpfx Afnei
(D) Total length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading length i.L.: approx. 13,620 mm
(G) Loading width i.L.: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
Tyre size 445/45R19.5
(H1) Unladen loading height, in driving position (level): approx. 1,020 mm
(H2) Laden loading height, in driving position (level): approx. 990 mm
(H3) Achievable ramp height at rear of vehicle with kingpin height 910 mm; laden, lifted: approx. 1,200 mm
Ride height set to 265 mm.
(K) Side through-loading height i.L.: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm]
(K1) Interior height under roof: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm], rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm]
(X1) Total height unladen, in driving position (level): = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment
(X2) Total height laden, in driving position (level): = H2 + K + T +/- body height adjustment
Body settings: The "Mega" body design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, side through-loading height, interior height) change according to the chosen body setting.

(T) Roof side construction height: approx. 180 mm. Due to roof beam design, the pallet-wide interior height i.L. matches the stated interior height under roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm
(P) Construction height above fifth wheel: approx. 90 mm
(S) Possible kingpin height, unladen: approx. 930 - 1,060 mm; level at approx. 930 mm (note total height!)
Brake system complies with ECE-R13
Electrical system complies with ECE-R48
Wabco brakes, air suspension
BPW three-axle ECO Air unit with disc brakes Ø 370 mm, ET 120, air suspension 260 mm stroke.
Tires: 6 x 445/45 R 19.5
Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in direction of travel
Vario Fix steel outer frame with 3 pairs of stanchion sockets
Mechanical/hydraulic lifting device, lift height from lowest point approx. 500 mm/600 mm, 4 control levers at each corner stanchion. Meets occupational safety guidelines BGV D 29. (Lifting roof can only be operated with doors open!)
Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only.
"Daimler Load Securing DL 9.5" certificate.
Chassis, frame, and base equipment add-ons made of metal and corrosion-protected by KÖGEL KTL

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.