Μεταφορέας ιμάντα για ροκανίδια και φλοιό

BV 3500

Κατάσταση: γενικά ανακατασκευασμένο (μεταχειρισμένο), Λειτουργικότητα: πλήρως λειτουργικό, έτος τελευταίας ανακατασκευής: 2025, 1) Log yard with 10 boxes (discharge boxes) – New and Used Log infeed and sorting line, new Feed speed 50 m/min. Including the following used components: Comprising: Cross conveyor for infeed, step feeder, new Block conveyor, used Block conveyor with ejector, used Debarking unit Cambio 50, used Split detection device with belt, used Measuring section – sorting block conveyor. Includes debarking; Inspection and painting; includes log infeed. Without boxes, without sheet metal cladding, without measurement system, without outfeed control or control cabinet. Root reduction device. 2) Log Infeed for Chip/Sawmill Line Heavy-duty cross conveyor for logs, NEW 4-strand log cross conveyor Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: bushed conveyor chain, pitch 100 mm – heavy-duty version Fixed end stops at the rear, without sheet metal cladding Steel support frame: HEB 200 Construction height: 1000 mm Drive: Gear motor 7.5 kW 3) Log Straightener, NEW Number of chains: 4 Axle spacing: 3500 mm Overall width: 5730 mm Distance between driver lugs: 1000 mm Drive shaft diameter: 100 mm Drive: SEW, 7.5 kW Speed: 10 m/min Design: fully sheeted/clad between chain runs 4) Step Feeder, NEW Pedpfx Absykr Aqs Ajpw Number of feed steps: 4 Width: 4200 mm Sheet thickness: moving steps 12 mm, fixed steps 20 mm Drive: SEW, 18.5 kW Drive by crank system and gear motor 5) Debarking/Chipping Line (Manufacturer WD) Block conveyor before RB 2 feeding station Length extended to 18.5 m – drive and return roller RB 2 Feeding Station With driven chain bed steel enclosure, designed for side loading of logs. Conveyor chain with drivers, frame in welded construction. Infeed and centering unit ZE with log turning device TDV and centering unit. Feeding system ZE: Log length: 2.5 – 5 m Min. feeding width: 80 mm Max. feeding width: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile chipper FZ 3 Machine frame with base frame 2 knife head housings with main bearing supports, 2 knife heads with finishing segments Drive power: 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above chain: max. 515 mm Distance between discs: max. 570 mm, min. 60 mm Disc diameter: 1260 mm Positioning by electric motors 2 hydraulic units 35 kW for preliminary and final trimming Pre-trimming cant log turning device Electrically driven roller conveyor TR 800 Centering and infeed system ZE with FZ 3 chipper