Μεταχειρισμένο Lvd Υδραυλικές Γκιλοτινοψάλιδες προς πώληση (13.131)

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 3, διάμετρος κάτω κυλίνδρου: 250 χιλ., διάμετρος άνω κυλίνδρου: 250 χιλ., διάμετρος πλευρικού κυλίνδρου: 200 χιλ., μήκος κυλίνδρου: 3.100 χιλ., μέγιστο πάχος λαμαρίνας: 9 χιλ., συνολικό βάρος: 5.400 κιλ, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Movable control panel - Centrally driven rolls powered by motor Fodpfjw Slbvsx Ag Eegg - Hydraulic up and down movement for the rear roll and lower roll - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top roll driven by planetary gearbox - Rear roll ball system for easy sheet movement - Compliance with EU safety directives - High-strength forged rolls made from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC Control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 200 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.000 χιλ., απόσταση μεταξύ των στηλών: 1.000 χιλ., δύναμη επαναφοράς: 70 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a highly rigid four-pillar hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The St52 quality steel construction frame undergoes stress relief by vibration method, ensuring high parallelism and perpendicularity tolerances are maintained even during long-term operation. The ram and cushion systems function independently and both stroke and pressure settings can be adjusted precisely via the touch panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled architecture, this press delivers high efficiency and reliable performance. Maintenance is minimized thanks to the automatic lubrication system and electronic filter contamination warnings. With its 200 / 70 ton capacity, this model is an ideal industrial press solution for medium- and high-tonnage metal forming, deep drawing, and die applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Long service life and low maintenance cost structure Areas of Application - Metal forming operations - Deep drawing applications - Die testing and production lines - Auxiliary pressing operations Fgjdpfjx N Umqex Ag Esg ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs., induction hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 Tons CAPACITY (CUSHION): 70 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m. PERPENDICULARITY TOLERANCE: 60 micron/m. STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. DIE HEIGHT: 100 mm MAX. DIE HEIGHT: 900 mm WELDING STRESS RELIEF: Performed by vibration WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec DEEP DRAWING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION MOVEMENT SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 320 mm – Ck45 CUSHION CYLINDER BORE: Ø 190 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs. APPROXIMATE DIMENSIONS: 4000 × 1450 × 1450 mm TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7" CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 14.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 250 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.000 χιλ., απόσταση μεταξύ των στηλών: 1.000 χιλ., δύναμη επαναφοράς: 80 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 250 / 80 TON FOUR-POST HYDRAULIC FORMING PRESS General Description The CRONOSSTECH 250 / 80 ton four-post hydraulic forming press is a high-rigidity hydraulic press solution designed for metal forming, deep drawing and precision pressing applications. The St52 grade steel frame undergoes stress relief treatment by vibration method. This ensures that high parallelism and perpendicularity tolerances are maintained during prolonged operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touchscreen panel. Fgjdpfxjx N Um Re Ag Ejg Fitted with REXROTH or PARKER hydraulic equipment, IE3 class motor and PLC controlled system, it delivers high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. With its 250 / 80 ton capacity, this model is an ideal industrial press solution for mid and high-tonnage metal forming, deep drawing and die operations. Key Advantages - Four-post high rigidity press frame - Independent stroke and tonnage control for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Long service life and low maintenance design Application Areas - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMİR POST DIAMETER: Ø 90 mm – 4 pcs. Induction hardened chrome plated shafts SLIDE BEARING: Bronze Zr14 RAM CAPACITY: 250 Tons CUSHION CAPACITY: 80 Tons DISTANCE BETWEEN POSTS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter RAM STROKE: 800 mm CUSHION STROKE: 200 mm MIN. OPENING: 100 mm MAX. OPENING: 900 mm WELDING STRESS RELIEF: By vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec. FORMING SPEED: 12 mm/sec. RETURN SPEED: 170 mm/sec. CUSHION TABLE FORWARD SPEED: 30 mm/sec. MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2026, τύπος ελέγχου: CNC έλεγχος, τύπος ενεργοποίησης: υδραυλικός, πλάτος εργασίας: 3.100 χιλ., μέγιστο πάχος λαμαρίνας: 8 χιλ., διάρκεια εγγύησης: 12 μήνες, CNC Controlled Hydraulic Guillotine Shear – 3000 x 8 mm With high cutting precision, robust body construction, and CNC-controlled systems, this machine is the ideal solution for sheet metal workshops and industrial production lines. It delivers high-quality and repeatable cutting performance across various sheet thicknesses. Standard Features Fgedex Rrk Nopfx Ag Eeg - ELGO P40T Touch NC Control Unit - Rexroth / Hoerbiger hydraulic system - Automatic CNC-controlled blade gap, stroke, and blade angle adjustment - 1,000 mm NC controlled, programmable, motorized backgauge - 250 mm throat depth - Programmable backgauge retract function - Lift-up backgauge feature for pieces longer than 1,000 mm - Adjustable cutting length via control panel to increase cycle for short cuts - Ball-supported sheet loading table - 2 cutting edges on upper blade / 4 cutting edges on lower blade - Special linkage system to reduce maintenance needs - 1,000 mm front squaring arms with scale, T-slot, and stopper - Front and side safety guards - Cutting line illumination and shadow wire - Front finger guard plate (1,000 mm openable cover) - Foot pedal - Movable control lever and enclosure cabins - Emergency stop buttons Optional Features - Rear pneumatic sheet support system (Type 1) - Rear pneumatic sheet support system with front return (Type 2) - Adjustable angle gauge (0–180º) - Custom-length front squaring arms - Special throat depth (500 mm) - Full-length openable front finger protection cover - Front finger safety light curtain - Special blade - Laser cutting line - Oil heater or oil cooler - Automatic or manual central lubrication - Electric panel cooling with air conditioning - CNC front support sheet loading arms - Rear light barrier compliant with CE standards - Light weight enclosure Technical Specifications (3000 x 8 mm) - Cutting length: 3,100 mm - Cutting capacity (450 N/mm²): 8 mm - Cutting capacity (700 N/mm²): 5 mm - Cutting angle: 0.5 – 2.7° - Number of hold-down cylinders: 14 - Cutting speed: 10 / 15 strokes/min - Throat depth: 250 mm - Backgauge travel (X): 1,000 mm - Table length: 3,500 mm - Table width: 900 mm - Main motor power: 15 kW - Oil tank capacity: 275 L - Machine weight: ~7.5 tons Technical specifications may vary according to the requested configuration.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 100 t, διαδρομή: 500 χιλ., πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame structure, it ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty applications in mind. The frame and supporting components are stress-relieved by vibration method. Bronze Zr14 material used in the slide bearings provides long-lasting and stable operation. Key Advantages - 8-guide H-frame construction - Vibrationally stress-relieved steel structure - Welds performed in accordance with ISO standards - PLC-controlled with touch screen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Frame and support parts stress-relieved by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, approved by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on the display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMIR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Fedox N Tx Sspfx Ag Ejgg Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibrational stress relief Welding Application: WPQR and WPS certified by TURK-AK, with EN ISO 15614-1/2017 welding certificates (supervised by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs. Approximate Press Height: 3400 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Lower Table Height From Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 600 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial machines engineered for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guide H-frame structure ensures balanced load distribution during pressing, resulting in long service life and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are designed for heavy-duty operations. The frame and carrier components are stress-relieved using vibration techniques. Bronze Zr14 slide bushings ensure uniform load distribution and high precision throughout the ram stroke. ⚙️ Standard Equipment • Welded steel construction, H-frame with 8 guide slides • Stress-relieved frame (vibration method) • Bronze Zr14 slide bushings • TURK-AK accredited WPQR & WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing conforming to CE standards • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic contamination indicator for hydraulic filters • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light barrier (standard for operator safety) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 600 Type: Welded steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMIR Slide Bushings: Bronze Zr14 Capacity (Ram): 600 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration method Welding: TURK-AK accredited WPQR & WPS certified (EN ISO 15614-1/2017), inspected by certified welding coordinators (EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore Diameter: Ø550 mm – Ck45 Fjdpfx Agjx N T Iaj Eegg Pot Cylinder Bore Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5,900 mm Approx. Press Width: 3,250 mm Approx. Press Depth: 2,300 mm Lower Table Height from Ground: 1,400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 28 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 4, διάμετρος κάτω κυλίνδρου: 400 χιλ., διάμετρος άνω κυλίνδρου: 400 χιλ., διάμετρος πλευρικού κυλίνδρου: 300 χιλ., πλάτος εργασίας: 2.550 χιλ., μέγιστο πάχος λαμαρίνας: 40 χιλ., Εξοπλισμός: διακόπτης έκτακτης ανάγκης, σκληρυμένοι κύλινδροι, τεκμηρίωση / εγχειρίδιο, τηλεχειριστήριο ποδιού, STANDARD EQUIPMENT * The lower, top, and side rolls move up and down linearly via body-attached hydraulic cylinders * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3 rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Easy removal of the bent part thanks to a hydraulically opening head and automatic lifting shaft * Highly user-friendly operation thanks to a mobile control panel * Welded steel frame construction * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Central lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) Fgsdpfx Ajxw Ebxog Eog * Electronic balancing system (Ø500-550-580-620-680) * Two-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending Capacity: 30/40 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 11 kW (14,96 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 10 mm/s, ταχύτητα όπισθεν: 130 mm/s, ύψος τραπεζιού: 935 χιλ., βάθος λαιμού: 410 χιλ., πλάτος εργασίας: 3.100 χιλ., μέγ. δύναμη κάμψης: 135 t, απόσταση μεταξύ των στηριγμάτων: 2.600 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Βασικός Εξοπλισμός • 4 άξονες CNC Y1, Y2, X, R (X+R Servo) • Διαδρομή 410 mm, Βάθος λαιμού 510 mm • Μονάδα ελέγχου ESA S650 CNC • Σερβοκινούμενο οπίσθιο στοπ με ακρίβεια ±0,03 mm, X=750 mm, R=250 mm • Ευρωπαϊκού τύπου σύστημα ταχείας σύσφιξης καλουπιού Promekam • Σύστημα πρόσθιας συρόμενης υποστήριξης • Χειροκίνητο σύστημα bombage (Original WILA με καστάνια) • Στενό κάτω τραπέζι (ευρωπαϊκού τύπου) • Γραμμικοί κανόνες GIVI • Τυπική επάνω μήτρα (Ύψ. 67, 850 R:08) • Τυπική κάτω μήτρα (60x60 mm, 4 καναλιών V=16-22-35-50 mm, Ύψ. 60) • Φωτισμός LED Προαιρετικός Εξοπλισμός • Επιλογές οπίσθιου στοπ 4-6-8 αξόνων (ξεκινώντας από X+R) • Υδραυλικό σύστημα σύσφιξης καλουπιού ROLLERI Roll200 Fedpfex Nn N Ejx Ag Eogg • WILA υδραυλικό σύστημα σύσφιξης επάνω/κάτω καλουπιού • Ευρύ κάτω τραπέζι για μήτρες πολλαπλών καναλιών • Διαδρομή οπίσθιου στοπ X μέχρι 1000 mm • Μπροστινό σύστημα ασφαλείας ακτίνας λέιζερ AKAS ή DSP • Πρόσθετα δάχτυλα οπίσθιου στοπ • Πρόσθετη γλώσσα οπίσθιου στοπ ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ Ισχύς κάμψης (τ) 135 Μήκος κάμψης (mm) 3100 Απόσταση μεταξύ πλευρικών τοιχωμάτων (mm) 2600 Διαδρομή (mm) 310 Άνοιγμα επάνω/κάτω σιαγόνας (mm) 515 Βάθος λαιμού (mm) 410 Ύψος τραπεζιού (mm) 935 Ταχύτητα κατάβασης (mm/δλ) 210 Ταχύτητα επιστροφής (mm/δλ) 130 Ταχύτητα πίεσης (mm/δλ) 10 Δοχείο λαδιού (Lt) 180 Βάρος μηχανήματος (kg) 8350 Κινητήρας (kW) 11 Μονάδα ελέγχου CNC ESA S640 Αριθμός αξόνων CNC Y1-Y2-X-R (4 άξονες) Οπίσθιο στοπ X (mm) 750 Οπίσθιο στοπ R (mm) 250 Bombage Χειροκίνητο (WILA τύπου) Σύστημα ασφαλείας Μπροστινή λέιζερ προστασία Προέλευση Τουρκία

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 30 kW (40,79 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 8 mm/s, ταχύτητα όπισθεν: 80 mm/s, ύψος τραπεζιού: 1.055 χιλ., βάθος λαιμού: 510 χιλ., πλάτος εργασίας: 6.100 χιλ., μέγ. δύναμη κάμψης: 400 t, απόσταση μεταξύ των στηριγμάτων: 5.100 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo motor-driven backgauge with ±0.03 mm accuracy, X = 750 mm, R = 250 mm • European-type Promecam quick-release tool clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper die (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-way V = 16-22-35-50 mm, 850 H:60) • LED lighting Fodox Nn Syspfx Ag Eegg Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel dies • Backgauge X distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (ton): 400 Bending Length (mm): 6100 Distance Between Walls (mm): 5100 Stroke (mm): 310 Open Height (Daylight) (mm): 535 Throat Depth (mm): 510 Table Height (mm): 1055 Approach Speed (mm/s): 100 Return Speed (mm/s): 80 Pressing Speed (mm/s): 8 Oil Tank Capacity (l): 400 Machine Weight (kg): 33,000 Main Motor (kW): 30 CNC Control Unit: ESA S640 Number of CNC Axes: Y1-Y2-X-R (4 axes) Backgauge X (mm): 750 Backgauge R (mm): 250 Crowning: Manual (WILA wedge type) Safety System: Front laser safety Country of Origin: Turkey

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 30 kW (40,79 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 8 mm/s, ταχύτητα όπισθεν: 80 mm/s, ύψος τραπεζιού: 985 χιλ., βάθος λαιμού: 510 χιλ., πλάτος εργασίας: 4.100 χιλ., μέγ. δύναμη κάμψης: 400 t, απόσταση μεταξύ των στηριγμάτων: 3.600 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Τυπικός Εξοπλισμός • 4 άξονες CNC Y1, Y2, X, R (Servo X+R) Fgedsx Npalspfx Ag Eeg • Διαδρομή 410 mm, βάθος λαιμού 510 mm • Μονάδα ελέγχου CNC ESA S650 • Πίσω οδηγός με σερβοκινητήρα, ακρίβεια ±0,03 mm, X=750 mm, R=250 mm • Γρήγορο ευρωπαϊκού τύπου σύστημα σύσφιξης καλουπιού Promekam • Σύστημα μπροστινής στήριξης με ολίσθηση • Χειροκίνητο σύστημα σκάφωσης (αυθεντική καστάνια WILA) • Ελαφριά κάτω τραπεζι (ευρωπαϊκού τύπου) • Γραμμικοί κανόνες GIVI • Τυπική άνω μήτρα (H: 67, 850 R:08) • Τυπική κάτω μήτρα (60x60 mm, 4 κανάλια V=16-22-35-50 mm, 850 H:60) • Φωτισμός LED Προαιρετικός Εξοπλισμός • Επιλογές πίσω οδηγού 4-6-8 αξόνων ξεκινώντας από X+R • Υδραυλικό σύστημα σύσφιξης καλουπιού ROLLERI Roll200 • Υδραυλικό σύστημα σύσφιξης WILA πάνω & κάτω καλουπιού • Ευρύ κάτω τραπέζι για πολύ-καναλικό καλούπι • Απόσταση πίσω οδηγού X έως 1000 mm • Σύστημα εμπρόσθιας ασφάλειας λέιζερ AKAS ή DSP • Πρόσθετα δάκτυλα πίσω οδηγού • Πρόσθετη γλώσσα πίσω οδηγού ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ ΤΙΜΕΣ Δύναμη κάμψης (Tons) 400 Μήκος κάμψης (mm) 4100 Απόσταση μεταξύ πλευρών (mm) 3600 Διαδρομή (mm) 310 Άνοιγμα άνω-κάτω σιαγόνων (mm) 535 Βάθος λαιμού (mm) 510 Ύψος τραπεζιού (mm) 985 Ταχύτητα καθόδου (mm/sec) 100 Ταχύτητα επιστροφής (mm/sec) 80 Ταχύτητα πρέσας (mm/sec) 8 Δοχείο λαδιού (L) 400 Βάρος μηχανήματος (kg) 22500 Κύρια μηχανή (kW) 30 Mονάδα Ελέγχου CNC ESA S640 Αριθμός αξόνων CNC Y1-Y2-X-R (4 Άξονες) Πίσω οδηγός X (mm) 750 Πίσω οδηγός R (mm) 250 Σύστημα σκάφωσης Χειροκίνητο (WILA καστάνια) Σύστημα ασφάλειας Λέιζερ εμπρόσθιας ασφάλειας Προέλευση Τουρκία

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.000 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guide H-frame construction ensures maximum rigidity during pressing and maintains parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful drive, is a reliable and durable solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration for stable operation. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guides - Stress-relieved frame by vibration - Bronze Zr14 guide bushings - TURK-AK accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination alert - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 2000 Type: Steel construction, H-frame with 8 guides Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 2000 Ton Moving Table Dimensions: 1500 × 2500 mm Fixed Table Dimensions: 1500 × 2500 mm Fgsdpfx Agjx N T Srj Esg Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TURK-AK under EN ISO 15614-1/2017 welding application certificate Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Spinning Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6300 mm Approx. Press Width: 3850 mm Approx. Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 95 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 400 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 150 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. With its 8-guided H-frame structure, the machine provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 400/150 model is designed for high-tonnage deep drawing and spinning operations, offering 400-ton main ram and 150-ton cushion capacities. The frame construction is stress-relieved by vibration to ensure long-term durability and reliable performance. ⚙️ Standard Equipment • Steel construction, 8-guided H-frame press body • Stress-relieved frame structure via vibration • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing to CE standards • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Real-time display of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Main Ram Capacity: 400 Tons Cushion Capacity: 150 Tons Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Cushion Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) Fjdpex N Uhhefx Ag Esgg Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Cushion Cylinder Bore: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 5600 mm Approx. Width of Press: 3250 mm Approx. Depth of Press: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 24 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.000 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., δύναμη επαναφοράς: 350 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-gib H-frame structure provides high rigidity during pressing operations, ensuring stable parallelism and perpendicularity tolerances even with large bed dimensions. The CHSP 1000/350 model, with a main ram capacity of 1000 tons and blank holder capacity of 350 tons, is specifically designed for deep drawing processes in automotive, white goods, defense, and heavy industry applications requiring controlled material flow. The steel construction frame, stress-relieved by vibration, ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Vibration-stress relieved frame structure • Bronze Zr14 gib slides • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen operator panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gib Slides: Bronze Zr14 Capacity (Ram): 1000 Ton Capacity (Blank Holder): 350 Ton Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Operator Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Fjdpfjx N Uilox Ag Eogg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 3, διάμετρος κάτω κυλίνδρου: 250 χιλ., διάμετρος άνω κυλίνδρου: 250 χιλ., διάμετρος πλευρικού κυλίνδρου: 200 χιλ., μήκος κυλίνδρου: 2.550 χιλ., μέγιστο πάχος λαμαρίνας: 10 χιλ., STANDARD EQUIPMENT Steel construction main body Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up/down movement for rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Top and bottom rolls driven by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls, manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator’s manual Fjdpfx Agow Slcge Ejgg OPTIONAL EQUIPMENT Top crane (hoist) to support large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending capacity: 8/10 mm Top & Bottom roll diameter: 250 mm Side roll diameter: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 liters Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 4, διάμετρος κάτω κυλίνδρου: 250 χιλ., διάμετρος άνω κυλίνδρου: 250 χιλ., διάμετρος πλευρικού κυλίνδρου: 200 χιλ., μήκος κυλίνδρου: 3.100 χιλ., μέγιστο πάχος λαμαρίνας: 9 χιλ., ΤΥΠΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ Ιδανικό για το λύγισμα λεπτών και μεσαίου πάχους χαλύβδινων, αλουμινένιων ή ανοξείδωτων υλικών Άριστο για το λύγισμα κυλινδρικών και διαφόρων διαμέτρων υλικών Η κάτω κύλινδρος και οι πλαϊνές κύλινδροι κινούνται πάνω-κάτω υδραυλικά με ευθύγραμμη κίνηση Προστασία κατά της υπερφόρτωσης Ο επάνω κύλινδρος κινείται με ηλεκτροκινητήρα και πλανητικό μειωτήρα. Η κάτω κύλινδρος διαθέτει κίνηση μέσω συστήματος καρδανικού άξονα. Δύο κύλινδροι έχουν ηλεκτρική κίνηση Τρεις ψηφιακές ενδείξεις διευκολύνουν την ανάγνωση της θέσης των κυλίνδρων Υδραυλικά ανοιγόμενη κεφαλή για εύκολη αφαίρεση του κατεργαζόμενου τεμαχίου Εύκολη χρήση μέσω κινητού πίνακα ελέγχου Συγκολλητό χαλύβδινο πλαίσιο Άξονες υλικού SAE 1050 (CK 45), σφυρηλατημένοι ή ελασματοποιημένοι, επαγωγικής σκλήρυνσης Σύστημα κυρτής κάμψης Υδραυλικό σύστημα εξισορρόπησης για παράλληλη κίνηση των αξόνων Συμμορφώνεται με τα πρότυπα ασφαλείας της ΕΕ και φέρει σήμανση CE Εγχειρίδιο χρήσης ΠΡΟΑΙΡΕΤΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ NC χειριστήριο με δυνατότητα τηλεϋποστήριξης Άνω γερανός (ανυψωτικό) για υποστήριξη σε λύγισμα μεγάλων διαμέτρων Υδραυλικά πλευρικά στηρίγματα για υποστήριξη σε λύγισμα μεγάλων διαμέτρων Τόρνοι λειασμένοι και γυαλισμένοι Διπλό σύστημα ρύθμισης ταχύτητας Ρύθμιση ταχύτητας χωρίς βαθμίδες Υδραυλοκινητήριο περιστροφής Εξαγωγικό σύστημα Fgedpow Slkkefx Ag Eeg ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ Μήκος κάμψης: 3100 mm Προ-λύγισμα: 5/7 mm Κάμψη: 7/9 mm Επάνω & κάτω κύλινδρος: 250 mm Πλαϊνός κύλινδρος: 200 mm Ελάχιστη διάμετρος καμπύλης: 375 / 1250 mm Ισχύς κινητήρα: 7,5 + 1,5 kW Ταχύτητα κάμψης: 5 m/min Χωρητικότητα δεξαμενής: 40 lt Μήκος: 5000 mm Πλάτος: 1200 mm Ύψος: 1370 mm Βάρος: 6800 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 4, διάμετρος κάτω κυλίνδρου: 400 χιλ., διάμετρος άνω κυλίνδρου: 400 χιλ., διάμετρος πλευρικού κυλίνδρου: 300 χιλ., μήκος κυλίνδρου: 3.100 χιλ., μέγιστο πάχος λαμαρίνας: 30 χιλ., STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via pistons connected hydraulically to the frame * Protected against overload * The upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Roll positions are easily read with three digital position indicators * Easy removal of bent workpiece thanks to hydraulically opening head and automatically lifting shaft * Very easy operation with movable control panel * Welded steel frame construction * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280–320–350–380–400–460) * Electronic balancing system (Ø500–550–580–620–680) * Dual-speed operation system Fgedpfx Agsw Sl T Se Eog OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280–320–350–380–400–460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5–5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20200 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 4, διάμετρος κάτω κυλίνδρου: 350 χιλ., διάμετρος άνω κυλίνδρου: 350 χιλ., διάμετρος πλευρικού κυλίνδρου: 260 χιλ., μήκος κυλίνδρου: 2.550 χιλ., μέγιστο πάχος λαμαρίνας: 25 χιλ., STANDARD EQUIPMENT Fgodpfx Aow Smb Rsg Eog * Lower, upper, and side rolls move linearly up and down via hydraulic cylinders connected to the machine frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gear reducer (all three rolls motor-driven) * Roll positions can be easily read via three digital displays * Hydraulic-opening head and automatic lifting pin allow easy removal of the rolled workpiece * User-friendly with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC automation controls * Top crane (hoist) to support large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet discharge system * Ground and polished rolls for special applications * Variable speed adjustment system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 16/20 mm Rolling Capacity: 20-25 mm Upper & Lower Roll Diameter: 350 mm Side Roll Diameter: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 200 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description Fodpfxex N T D Us Ag Eogg The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-slide H-frame structure, forces generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 200 model is designed for reliable performance and long service life in medium-to-high tonnage applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved by vibration methods. The bronze Zr14 slide bearing system ensures smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slides - Frame and supporting components stress-relieved by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame with 8 slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 200 tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: Vibratory stress relief Welding: WPQR & WPS certified by TÜRK-AK, in accordance with EN ISO 15614-1:2017, supervised by certified welding coordination engineers to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 8 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 400 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guide H-frame structure, the high loads generated during pressing are evenly distributed, offering stable and repeatable operation. The CHP 400 model is engineered to deliver long-lasting, reliable performance for heavy-duty applications demanding high tonnage. CHP Series – Structural Features CHP series presses are designed with heavy-duty operation in mind. The frame and carrier components are stress-relieved using vibration methods. Bronze Zr14 slide bushings ensure even load distribution during ram movement, which contributes to long-term precision. Fedpfx Agex N T Hpj Eogg ⚙️ Standard Equipment Steel construction, H-type press frame with 8 guides Stress-relieved frame and carrier components by vibration Bronze Zr14 slide bushings WPQR & WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Machinery designed and manufactured in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning Monitoring of hydraulic unit oil temperature and system status via display Cooling system Off-line filtration Two-hand control system Light barrier (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 400 Ton Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Stress relieved by vibration Welding Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1/2017, audited by welding coordination engineers certified to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs. Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8 Guided Sliders General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slider H-frame structure ensures stable and repeatable operation by providing balanced distribution of high loads during pressing. The CHP 500 model is designed for heavy-duty production processes that demand high tonnage, targeting long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed specifically for demanding, heavy-duty operation. The frame and load-bearing components are stress-relieved by vibratory methods. Bronze Zr14 slider bushings ensure even load distribution along the ram stroke, maintaining long-term precision. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 guided sliders - Vibratory stress-relieved frame and load-bearing parts - Bronze Zr14 slider bushings - WPQR & WPS certified and TÜRK-AK accredited welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured according to CE standards - PLC-controlled hydraulic system - DELTA 7” touch screen - Adjustable ram stroke and tonnage control Fedpfx Ajx N T H Ajg Eogg - Automatic lubrication system - Electronic filter contamination alert - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 500 Type: Steel construction, H-type frame with 8 guided sliders Frame Material: St52 – ERDEMİR Slider Bushings: Bronze Zr14 Capacity (Ram): 500 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 1100 mm Stress Relief: Vibratory method ding Welding Application: WPQR & WPS certified by TÜRK-AK, holds EN ISO 15614-1/2017 welding certificate (inspected by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Rapid Descent Speed (Moving Table): 150 mm/sec Drawing Speed (Moving Table): 12 mm/sec Return Speed (Moving Table): 170 mm/sec Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.800 χιλ., μήκος τραπεζιού: 2.600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8 Sliding Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and embossing operations requiring very high tonnage. The 8-slide H-frame structure ensures maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are reliably maintained throughout the long stroke. The CHP 2500 model, with its large bed dimensions, multi-cylinder main pressing system and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified with TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing comply with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination monitoring - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relief Welding Application: TÜRK-AK accredited WPQR & WPS, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Fodpfx Agox N T S Es Esgg Movable Table Fast Down Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 6500 mm Approx. Width of Press: 3950 mm Approx. Depth of Press: 2600 mm Bottom Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 100 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., δύναμη επαναφοράς: 40 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Hydroforming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operation principle to provide controlled material flow for sheet metal forming, deep drawing, and hydroforming applications. The 8-guideway H-frame construction ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton blank holder (cushion) capacity, specifically engineered for precise deep drawing and hydroforming operations. The frame is stress-relieved via vibration, ensuring a long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame body - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS approved welding by TÜRK-AK accredited applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status displayed on-screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-guideway H-frame body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 100 Ton Capacity (Cushion): 40 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Fgsdjx N T Uyspfx Ag Eeg Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding Applications: WPQR and WPS approval by TÜRK-AK accredited certifier EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Hydroforming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Advancing Speed: 30 mm/sec Main Cylinder Bore: Ø230 mm – Ck45 Cushion Cylinder Bore: Ø140 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 150 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 800 χιλ., απόσταση μεταξύ των στηλών: 800 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 150/50 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 150/50 ton column-type hydraulic deep drawing press is an industrial press solution developed for metal forming, deep drawing, and precision pressing applications, featuring a rigid four-column body structure. The St52-grade steel frame undergoes stress relief via vibration method, ensuring high parallelism and perpendicularity tolerances during long-term operation. Ram and pot systems operate independently; stroke and pressure settings can be adjusted precisely via the touch panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC control, this system provides high efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts minimize maintenance needs. With its 150/50-ton capacity, this model is ideal for mass production, die testing, and medium-to-high tonnage deep drawing applications. Key Advantages - Rigid 4-column press frame - Independent stroke and tonnage adjustment for ram and pot - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Fields of Application - Metal spinning and forming operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: 4-Column BODY MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 Tons CAPACITY (POT): 50 Tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 microns/meter PERPENDICULARITY TOLERANCE: 60 microns/meter STROKE (RAM): 600 mm STROKE (POT): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELDING STRESS RELIEF: Via vibration WELDING APPLICATION: WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731), TÜRK-AK accredited Fgedpfx Asx N Ul Tsg Ejg MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE FAST APPROACH SPEED: 150 mm/sec MOVING TABLE DEEP DRAWING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 280 mm – Ck45 POT CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3800 mm APPROX. PRESS WIDTH: 1150 mm APPROX. PRESS DEPTH: 1150 mm DISTANCE FROM GROUND TO LOWER TABLE: 1200 mm MAIN CHARGE VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (Adjustable via screen) RAM / POT STROKE AND TONNAGE ADJUSTMENT: Adjustable via panel SYSTEM & PRESS STATUS MONITORING: Via screen DIE MEMORY: Adjustable via panel LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 300 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.000 χιλ., απόσταση μεταξύ των στηλών: 1.000 χιλ., δύναμη επαναφοράς: 100 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 300 / 100 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton column-type hydraulic deep drawing press is a four-column hydraulic press solution with high rigidity, specially developed for metal forming, deep drawing, and precision pressing applications. Fgsdpex N Unzefx Ag Esg The body is constructed from St52 grade steel and undergoes stress-relieving via vibration to ensure that parallelism and orthogonality tolerances are stably maintained throughout the long stroke during the pressing process. The ram and blankholder systems operate independently; stroke and tonnage adjustments are precisely controlled via the touch panel interface. Equipped with REXROTH or PARKER hydraulic components, an IE3 efficiency-class motor, and PLC control, the press offers high productivity and reliable operation. Automatic lubrication and electronic filter clogging alerts significantly reduce maintenance requirements. With its 300 / 100 ton capacity, this model is an ideal industrial press solution for medium- and high-tonnage metal forming, deep drawing, and die applications. Key Advantages - 4-column, high-rigidity press frame - Independent stroke and tonnage adjustment for ram and blankholder - Full control via touch panel - High precision and repeatability - Long service life with low maintenance costs Fields of Application - Metal forming operations - Deep drawing processes - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 300 Tons CAPACITY (BLANKHOLDER): 100 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 microns/m PERPENDICULARITY TOLERANCE: 60 microns/m STROKE (RAM): 800 mm STROKE (BLANKHOLDER): 200 mm MIN. DIE OPENING: 100 mm MAX. DIE OPENING: 900 mm WELD STRESS RELIEVING: Vibration stress relief WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 class MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST APPROACH SPEED: 150 mm/s DRAWING SPEED: 12 mm/s RETURN SPEED: 170 mm/s BLANKHOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 390 mm – Ck45 BLANKHOLDER CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, ισχύς: 18,5 kW (25,15 ίππους), διαδρομή: 310 χιλ., ταχύτητα λειτουργίας: 10 mm/s, ταχύτητα όπισθεν: 140 mm/s, βάθος λαιμού: 410 χιλ., πλάτος εργασίας: 3.100 χιλ., μέγ. δύναμη κάμψης: 220 t, απόσταση μεταξύ των στηριγμάτων: 2.600 χιλ., τύπος ελέγχου: CNC έλεγχος, ρύθμιση πίσω στοπ: ελεγχόμενο με CNC, αριθμός αξόνων: 4, τύπος στεφάνωσης: κινητήριος, τύπος ενεργοποίησης: υδραυλικός, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized back gauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedges) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel die • Rear gauge X travel 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge tong TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Fedpfx Agox Nnzbs Eegg Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/sec) 180 Return Speed (mm/sec) 140 Pressing Speed (mm/sec) 10 Oil Tank (Lt) 290 Machine Weight (kg) 11300 Main Motor (kW) 18.5 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedges) Safety System Laser front safety Origin Turkey