Κέντρο κατεργασίας - κάθετο

MAZAK VTC-820/30

x-axis travel 3000 mm
y-axis travel 820 mm
z-axis travel 720 mm
Control Mazatrol Smooth G
Spindle taper SK 40
Spindle speeds 35 - 12,000 rpm
Spindle drive 15 kW
Distance spindle nose to table top 140 - 860 mm
Table load capacity 2500 kg
Rapid traverse (x/y/z) 50 m/min
Table width 3500 mm
Table length 820 mm
Table height above floor 870 mm
T-slots 7
T-slot width 18 mm
T-slot spacing 100 mm
Tool changer 48 positions
Tool change time 4.7 sec
Tool diameter with 2 free positions 130 mm
Tool diameter fully loaded 80 mm
Max. tool weight 8 kg
Max. tool length 350 mm
Required air pressure 5 - 9 bar
Air consumption 260 l/min
Electrical specs - Voltage/Frequency 400 / 50 V/Hz
Coolant tank 500 L
Total connected load 46.7 kW
Machine weight approx. 15.4 t
Space requirements approx. 5.3 x 3.6 x 3.3 m

Standard machine incl. the following special equipment:
- Preparation for dual oil mist extraction
- Air cooling through rotating milling spindle
- 48-position tool magazine
- Manual pulse generator
Iodpfx Aoyvvluofnotd
- 3-color LED signal light
- Additional work area lighting
- Air blow unit at milling spindle
- High-pressure coolant supply through spindle, 15 bar
- Preparation for MAZAK Monitoring
- Chip conveyor, discharge left (Crowther)
- Manual grease gun
- Grease cartridge
- Mazak API
- Boring cycle with chip breaking
- Synchronous tapping
- Rapid traverse with constant inclination angle

STANDARD ACCESSORIES
Transformer for European market
USB port (1 connection)
Mazak standard colour
Work area lighting

SAFETY FEATURES
Operator door with interlock switch
Work area enclosure
Splash guard encloses work area from the side
Fully enclosed work area
Protection from chips, coolant and access to the work area during automated operation
Safety measures to global standard

COOLANT SUPPLY
Coolant supply through spindle (pump pressure = 5 bar)
Complete coolant system incl. pumps, valves, piping and nozzles for efficient production of quality components

FACTORY AUTOMATION
Automatic ON/OFF and warm-up function
Automatic warm-up switch-on via digital timer

MEASUREMENT SYSTEM
Tool length measurement and tool breakage detection

NUMERICAL CONTROL
Horizontally adjustable NC operation panel
Relocation detector
Mazatrol SmoothG control
19" LCD colour screen (touch screen)
Mazak thread drilling/boring cycle Tornado (Mazatrol)
EIA/ISO input function
Background tool path check
3D coordinate transformation
Form compensation for rotary axes
Mazacc-2D software (contour compensation)
Mazacc-3D software package
MAZACC-3D high-speed software package (NO456) required additionally
High-smoothing control
LAN interface
SD memory card I/F
Smooth standard software for M/C
- NO443 B) MAZACC-2D software (workpiece form compensation)
- NO444 D) MAZACC-3D high speed software package
- NO445 B) Form compensation for rotating axes
- NO497 D) High-precision finishing control
- Seamless corner-point control
- Variable acceleration control
- Ultra high-speed machining mode
- NO498 Rapid traverse path rounding function
Absolute positioning system

- All dimensions, weights, and performance specifications are not binding -

- Used ma...

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.