Κουλοχέρη γεώτρηση

MCN Junior

Κατάσταση: σχεδόν καινούργιο (μεταχειρισμένο), Έτος κατασκευής: 2005, Dowel and slot mortising machine GANNER GANNOMAT JUNIOR 323 Very good condition, the machine is virtually as new. It comes from an educational institution that was closed about one year after the machine was purchased, so it has seen a maximum of 10 operating hours. You can mill slots and drill dowel holes on two levels without reclamping. - 380V, 1500W - 2800 rpm - Year of manufacture: 2005 With this machine, you can mill elongated slots for e.g. lock cases and similar items, or create all kinds of frame dowel joints: at right angles, butt joints, and mitre joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacture, and similar applications. Thanks to two-level drilling, grid/stops, and machine design, dowel joints can be manufactured in a very short time, making the machine extremely efficient. - Equipped with two fold-out table extensions. - Requires a 6 bar compressed air connection (air consumption is very low). - Right-hand rotation. - Mills and drills very well and cleanly. - Including two angle stops (one central stop and one side stop usable on both sides), plus an adjustable mitre stop. At the front of the machine table, there is a 2000 mm long stop rail with two flip stops on each side; the rail can be shortened or extended as required. Workpiece clamping is done using two pneumatic clamping cylinders. Nedpjxqy Dnefx Agcoli Height adjustment between drilling levels is also pneumatic; the pneumatic switch for this is located at the front of the machine, allowing rapid changeover of grids and drilling levels. Heights of each drilling level are displayed by two mechanical counters, with adjustment screws above them for setting drilling heights. Features a precision 12 mm indexing rail with a central index and 12 indexes to both the left and right. Can be quickly converted for slot mortising; in this mode, the machine can be used without indexing, featuring two adjustable stops left and right, with a maximum working width of 420 mm. - Maximum drilling height: 100 mm - Maximum drilling depth: 150 mm (with stop and scale) - Maximum workpiece height: 160 mm Everything works perfectly. We deliver and demonstrate the machine personally within Germany for €220. This ensures you take no risk with the purchase. Delivery to Austria and other EU countries is possible on request. The machine table is 870 mm wide, 140 mm deep at the sides, and 350 mm deep in the center. Professional-grade machine, not DIY store junk. Ready for immediate use. With two jaw chucks up to 20 mm. Very robust and durable construction. The precision guides with play-free ball bearing bushings are in perfect condition and operate smoothly.