μηχάνημα κοπής πλάσματος

Microstep Mastercut Eco Plus 3001.15

Microstep Mastercut Eco Plus 3001.15,
Year of manufacture: 2016,
Control system: IMSNC,
Cutting table: 3000 x 1500 mm,
Extraction ducts left/right,
Plasma source: Kjellberg Hi Focus 161i, adjustable 10–160 A.

Power Source: HiFocus 161i PLUS
• Flexible adaptation of the cutting process to the required conditions via soft-switch inverter and microprocessor control
• Optimal process management through extremely fast regulation of cutting current
• Process monitoring during torch cooling, ignition time, pilot arc time, and short circuit time during torch ignition and by the power source
• Status and fault display via LED and display
• Analog and serial interfaces for integration with CNC controls
• Stepless adjustment of cutting current from 10–160 A, and marking current from 5–25 A
• Optimal piercing thanks to stepless delay for main arc start, and adjustable current ramp-up
• Adjustable current reduction for the control system's corner, start, and end signals
• Automatic display of the preset cutting current
• Serial data transfer for PC-based diagnostics

Plasma Cutting Technology: Contour Cut
• Further developed HiFocus technology for mild steel
• Optimized for cutting fine inner and outer contours
• High cut quality and contour accuracy
• Holes with angle deviation according to DIN EN ISO 9013, range 2–4
• Minimal angle deviation and smooth cutting surfaces
• Excellent repeatability and dimensional accuracy
• No time-consuming reworking required—high productivity, low costs
• No additional equipment, software, or new consumables required—standard as factory fit

Plasma Torch: PerCut 200/210
• PerCut 200 plasma machine torch for standard and high-precision bevel cutting
• Quick-change torch PerCut 210 with threaded locking for fast, easy outfitting
• Specialty torches available for special applications
• Increased cutting speeds reduce cost per meter cut
• Long consumable lifetimes save resources
• Narrower kerf, resulting in less emissions and waste
• Significantly lower gas consumption compared to competitors due to effective liquid cooling to the nozzle tip
• Lower noise level due to decreased gas consumption
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking possible with same consumables
Dsdpfx Aoyzy S Aefiour

Power Source: HiFocus 161i
Mains connection: 400 V; 3 Ph; 50 Hz
Max. connected load: 28 kVA (100% duty cycle)
Main fuse (slow): 50 A
Protection class: IP 22
Open circuit voltage: 330 V
Cutting current: 10–160 A (100% duty cycle)
Marking current: 5–25 A (100% duty cycle)
Cutting range: max. 50 mm, recommended 0.5–38 mm
Max. piercing thickness: 30 mm
Weight: 206 kg

Plasma machine torch: PerCut 200
Quick-change torch: PerCut 210
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, Air, N2/H2 (F5)

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.