τόρνος CNC

NAKAMURA-TOME WT-300

NAKAMURA-TOME WT-300 CNC Lathe

- Operating voltage: 200/220 V
- Frequency: 50/60 Hz
- Main switch: 300 A
- Transformer: 93.4 kVA
- Max. diameter upper side: 199 mm
- Max. diameter lower side: 270 mm
- Distance between spindle heads: max. 1100 mm / min. 250 mm
- Max. bar stock diameter: 102 mm left side, right side: 65 mm
- Chuck size left side: 305 mm, right side: 210 mm
- Turret force (X-axis) X1: 11,000 N, X2: 11,000 N
- Turret force (Z-axis) Z1: 9,000 N, Z2: 6,000 N
- Turret force (Y-axis): 6,000 N
- Travel X1: 152 mm, X2: 195 mm
Hnodpfx Adox Tzp Te Njg
- Travel Z1 + Z2: 780 mm
- Travel Y-axis: ±40 mm
- Travel B2 axis: 850 mm
- Spindle speed: 2,500 rpm
- Spindle bore: 120 mm
- Front bearing inner diameter: 160 mm
- Draw tube bore: 103 mm
- Spindle height: 1,228 mm
- Spindle speed R: 4,500 rpm
- Spindle bore: 80 mm
- Front bearing inner diameter: 110 mm
- Draw tube bore: 66 mm
- Spindle mount: 2-point
- C-axis
- Rapid traverse speed: 600 rpm
- Cutting feed speed: 1 - 4,800 °/min
- Upper turret: 12-position turret
- Number of tool stations: 24
- Number of turret indexing positions: 24
- Turret outside diameter: 406 mm
- Turret thickness: 100 mm
- Tool clearance: 641 mm
- Turret clamping force: 30 kN
- Tool dimensions: 20 and 25 mm
- Boring bar mounting diameter: 25/32 mm
- Lower turret type: 24-position turret
- Turret outside diameter: 365 mm
- Turret thickness: 100 mm
- Tool clearance: 600 mm
- Tool dimensions: 20/25 mm
- Driven tool spindles on upper and lower turret
- Spindle speed: 3,600 rpm
- Number of spindle speed ranges: stepless
- Number of tool insert positions: 12
- Toolholder types and sizes: longitudinal toolholder: 20, transverse holder
- Thread tapping holder, longitudinal: M3 - M10
- Thread tapping holder, transverse: M3 - M10
- Cutting and feed speed X1 and X2: 16,000 mm/min
- Cutting and feed speed Z1 and Z2: 27,000 mm/min
- Cutting and feed speed B2 axis: 27,000 mm/min
- Cutting and feed speed Y-axis: 6,000 mm/min
- Feed rate X1 and X2: 1 - 4,800 mm/min
- Feed rate Z1 and Z2 axis: 1 - 4,800 mm/min
- Feed rate B axis: 1 - 4,800 mm/min
- Feed rate Y-axis: 1 - 4,800 mm/min
- Including the tool holders shown in the photos as well as both HAINBUCH collet chucks on the main and sub spindle
- Also including chip conveyor and transformer
- Complete with documentation

Important: The item must be collected, bindingly, on a pre-arranged date between 18th and 26th February 2026.

FCA D-78087 Mönchweiler – loaded onto truck

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.