Ημιρυμουλκούμενο σιλο

O.M.E.P.S. CR 47

O.ME.P.S tipping silo trailer—Model: CR 47

Chassis:
Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva

Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise and lower valve, load gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn

Rims and Tires:
6 wheels with 385/65 R22.5 tires, manufacturer's choice on Alcoa Dura-Bright aluminum rims, 11.75x22.5 ET 120

Brake System:
EBS 4S/2M WABCO pneumatic braking system with RSS, compliant with standard 98/12/CE – ECE R13/09, brake wear indicator connected

Landing Gears:
Mechanical landing legs with two speeds, 2x 20 t bearing capacity with swivel foot, rear without stabilizer

Electrical System: All lights in LED design, 24V installation comprising: a 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lights in the required number, rear position lights, front clearance lights, rear license plate lights, lights in accordance with standard 97/28/CE-2007/35/CE, 2 multi-chamber lights at the rear at turntable height on aluminum brackets as per 97/28/CE-2007/35/CE, 1 LED work light on the tank, yellow warning light at the rear mounted at hose tube height, 2x reversing lights in underride guard, 2x reversing lights at landing gear height (each can be switched off at the energy console)

Tank Configuration:
Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn),
Single-chamber tank, 47,000 ltr. capacity, tank warranty: 24 months from delivery.
Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°

Loading Options:
4 manholes DN 450 with swing- and foldable dome covers. The covers are pressure-tight closed with four wing nuts each, rubber support for dome cover on top for storage, rain channel at front closed – rear open

Material Discharge:
1 material discharge cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, cone can swing to the side, shut-off valve DN 150 with white seal, connection: STORZ-A

Air Piping:
One 2.5" stainless steel air manifold mounted on the right-hand side operation, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off dampers) in stainless steel, top air hose and connecting hoses with 2" STORZ couplings, micron filter, vacuum valve on top of tank, 1x vibrator 1m in front of turntable
Rjdpfx Asx Nufmjh Nsbt

Ladders and Access:
1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail deployable from below with a separate ladder folding section and locking brake when opened, 1 aluminum safety walkway fitted along the top left of the tank, anti-slip coating on the tank

Discharge Hose Storage:
4 hose tube carriers, 5 m length DN 200 aluminum, with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories: The side underrun protection is made of anodized aluminum design (left side).

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.