Γεννήτρια θερμού αέρα

Reznor UDSA055-4E

Reznor UDSA gas-fired warm air heater

UDSA Gas-Fired Warm Air Heaters – Top Efficiency All the Way

The most renowned unit from REZNOR is the UDSA gas-fired warm air heater, specifically designed for even air distribution in industrial halls. This recirculation unit is easy to install and available in 14 capacity sizes ranging from 7 to 97 kW. It consists of a heat exchanger, gas burner, and an exhaust fan. Combustion air can be drawn either as standard from outside or from within the facility.

The UDSA warm air heater from REZNOR ensures uniform air distribution throughout the heated hall. Its patented heat exchanger sets new standards in terms of airflow characteristics and heat transfer, delivering an efficiency exceeding 92%.

UDSA: compact, revolutionary, and trendsetting.
With this new generation of units, halls can be heated in a particularly efficient manner directly—i.e., without central heating—using decentralized, modulating gas-fired warm air heaters.

REZNOR UDSA Gas-Fired Warm Air Heaters – Main Advantages:

• Efficiency of over 92%
• Suitable for vertical installation
• Low NOx emissions
• Innovative combustion design
• Quiet operation
• CE system certification, type B or C
• Compact design for easy installation
• Uniform heat distribution
Hsdpfswb A Hiex Ab Ajk
• Standard vertical and horizontal air deflection louvers
• Heating power modulation down to 50%
• EC technology
• ErP Ready

These units are direct-fired gas warm air heaters equipped with fan-assisted atmospheric multi-gas burners. Installation, gas, and flue connections must only be performed by an authorized installation company.

The gas warm air heaters are suitable for:
• Natural gas or LPG operation
• Recirculation mode
• Inlet temperatures below 5°C with stainless steel heat exchanger*
• Single-stage or two-stage* operating modes, controlled via room thermostat and control switch (Heating)
• Ventilation mode°, controlled via ECOtronic TN-L° with day-night-week programming
• Flue gas extraction via roof, Type B or C° or through external wall, Type C°

Gas Warm Air Heater Type: UDSA055-4E
Appliance Types: B22P–C12–C32–C52–C62
Designation: DE
Gas Category: I2ELL
Gas Type: G20 Natural Gas
Connection Pressure: 20 mbar
Nozzle Pressure: 8.40 mbar
Max. Rated Heat Input (Hs) QN: 66.04 kW
Max. Rated Heat Input (Hi) QN: 59.50 kW
Min. Rated Heat Input (Hs) QN: 33.02 kW
Min. Rated Heat Input (Hi) QN: 29.75 kW
Max. Rated Heat Output: 54.74 kW
Min. Rated Heat Output: 26.92 kW
Mains Voltage: 230V 1N, 50Hz
Air Flow Rate: 5830 m³/h
Protection Rating: IP20
Pin No. 0461BN0677

Financing through our banking partner also available.
komplett-konzept.leasingo.de

For more products – new and used – visit our shop!
International shipping costs on request!

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.