Ημιρυμουλκούμενο ανατρεπόμενο

STAS V-9.70 light 53m³ Wasserdicht

Lightweight chassis version
In aluminium (15-6-12)
Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm

Axles and Suspension
430 mm disc brakes
SAF (CD) axle assemblies 3x9 t with stabilisation, centrally-mounted air bags attached to the chassis longitudinal beam, 1st axle liftable with traction aid and manual forced lowering, Smart Board Info Center, raise/lower valve, BVA brake wear indicator, automatic tipping lowering system

Tyres and Wheels
6 wheels with 385/65 R 22.5 tyres from selected manufacturer, with Alcoa DuraBright 11.75 x 22.5 ET 120, UNI wheel bolts
for aluminium rims, wheel nut caps

Landing Gear
Mechanical landing legs with two speeds and 2x20 t support load, with swiveling foot for air suspension, braking system
complying with E.G. standards, dual-circuit Wabco system, spring-loaded parking brake on two axles and Wabco EBS-E 2S/2M incl. RSS (Roll Stability System) with premium modulator, Wabco Smartboard Info Center, aluminium air reservoir system

Electrical System
In accordance with StVZO regulations, with 4 three-chamber lights (2x2) Aspöck type, 24-volt system with 2x7-pin and 1x 15-pin socket, with side marker lights, 2 LED Pro Rock work lights switchable, each 2 LED work lights on sides and rear. All air and electrical lines are neatly routed in plastic pipes!

Tipper Body/Skip "Watertight" Body fully welded inside
Aluminium dump body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110) with 45-degree beveled profile to side wall, front wall 4 mm reinforced in straight version, rear wall as pendulum tailgate in straight version with LL rubber seal, additional spindle locks 2x side and 4x bottom, 4 pneumatic air cylinders – 2 for opening, 2 for closing, rubber buffers on the tipper body attached to the frame at the front wall,

Hydraulic System
Chedpfsxfyb Asx Aacsd
Tipping cylinder with "shroud" mounting
Hydraulic cylinder mounted to the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees

Accessories
6 Parlok mudguards, complete spray flaps across the entire vehicle width, fitted to underrun protection, ALU spare wheel holder, foldable side underrun protection right, large tool box type 860, approx. 3 m aluminium ladder, approx. 150 mm raised in centre, additionally, centrally mounted hoop holder for positioning up to 2 hoops to increase loading width, sliding tarpaulin with central translucent strip and separate reinforcements in wear areas approx. 900 g/m2 quality with sliding curtain system and quick-release closure, continuous rubber cord in rear closure of the tarp with two tension hooks to be fastened on the rear swing bow, walkway on the chassis painted in chassis colour, rear tarpaulin closure with welded-in rubber cord for watertightness, robust foldable underrun protection in aluminium, 2" "Clear-Pass" spray flaps on mudguards as per EC standard, holders for shovel, broom and scraper mounted above the axles, etc.

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.