Πριόνι για κοπή δεμάτων, πριονοκορδέλα formatTA Technology
OBS1300-A
Πριόνι για κοπή δεμάτων, πριονοκορδέλα format
TA Technology
OBS1300-A
Τιμή εκκίνησης δεν συμπεριλαμβάνεται ΦΠΑ
95.000 €
Έτος κατασκευής
2025
Κατάσταση
Καινούριο
Τοποθεσία
Delfina 

Προβολή φωτογραφιών
Εμφάνιση χάρτη
Στοιχεία για το μηχάνημα
- Περιγραφή μηχανήματος:
- Πριόνι για κοπή δεμάτων, πριονοκορδέλα format
- Κατασκευαστής:
- TA Technology
- Μοντέλο:
- OBS1300-A
- Έτος κατασκευής:
- 2025
- Κατάσταση:
- καινούργιο
- λειτουργικότητα:
- πλήρως λειτουργικό
Τιμή & Τοποθεσία
Τιμή εκκίνησης δεν συμπεριλαμβάνεται ΦΠΑ
95.000 €
- Τοποθεσία:
- Delfina 20, 98-354 Siemkowice, PL
Κλήση
Τεχνικές λεπτομέρειες
- Μέγιστο ύψος κοπής:
- 1.300 χιλ.
- Μέγιστο πλάτος κοπής:
- 1.300 χιλ.
- Συνολικό βάρος:
- 9.000 κιλ
- Μέγιστο βάρος τεμαχίου:
- 8.000 κιλ
- Κίνηση πριονιού:
- 11.000 W
Λεπτομέρειες προσφοράς
- ID Καταχώρησης:
- A203-12575
- Τελευταία ενημέρωση:
- στις 16.10.2025
Περιγραφή
The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency of the material sizing process to the desired length.
The showcased machine is available immediately—we invite you to an inspection.
Technical specifications:
• Maximum bundle dimensions (width/height): 1300 x 1300 mm
• Minimum bundle dimensions (width/height): 800 x 800 mm (limit of hydraulic clamp operation; cutting of smaller bundles is permissible)
• Additional equipment for cutting bundles with a minimum length of 600 mm
• Maximum cut-off bundle length: 3000 mm
• Maximum input bundle length: 6000 mm
• Maximum bundle weight: 8,000 kg
• Cutting accuracy: +/- 2 mm
• Dedicated lubrication unit for the guide bar
• Cutting guide: GB TITANIUM (rigid and robust, milled from a single piece of steel; backwards compatible with STHIL guides*)
• STHIL RM404 cutting chain
• 11 kW WEG guide drive motor
• Fast measuring system with absolute encoder (retains position even after power loss) and positioning accuracy of 0.2 mm
Isdpsxn Rt Uofx Ad Hjbc
• Innovative strapping unit with intelligent location system for bonding points based on set cutting lengths
• System of three sets of hydraulic clamps
• Hydraulic system based on PONAR components
• Crosswise loading conveyor for introducing bundles into the machine
• Intelligent unloading system, crosswise chain conveyor
• System with two pairs of tiltable (hydraulic) rollers allowing large offcuts to freely drop onto the conveyor
• TA DRIVE gearmotors
• HIWIN linear guides with increased load capacity
• YHY Japan bearings
• YASKAWA inverters and servo motors
• 21” touchscreen operator panel
• SIEMENS PLC controller (with remote access system)
• Safety system and SICK sensors
Warranty:
12-month warranty. Service response time: 24 hours. Spare and consumable parts warehouse.
With the machine we supply:
• Operation manual
• Declarations of conformity
• Warranty card
• Electrical diagrams
• Hydraulic diagrams
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
The showcased machine is available immediately—we invite you to an inspection.
Technical specifications:
• Maximum bundle dimensions (width/height): 1300 x 1300 mm
• Minimum bundle dimensions (width/height): 800 x 800 mm (limit of hydraulic clamp operation; cutting of smaller bundles is permissible)
• Additional equipment for cutting bundles with a minimum length of 600 mm
• Maximum cut-off bundle length: 3000 mm
• Maximum input bundle length: 6000 mm
• Maximum bundle weight: 8,000 kg
• Cutting accuracy: +/- 2 mm
• Dedicated lubrication unit for the guide bar
• Cutting guide: GB TITANIUM (rigid and robust, milled from a single piece of steel; backwards compatible with STHIL guides*)
• STHIL RM404 cutting chain
• 11 kW WEG guide drive motor
• Fast measuring system with absolute encoder (retains position even after power loss) and positioning accuracy of 0.2 mm
Isdpsxn Rt Uofx Ad Hjbc
• Innovative strapping unit with intelligent location system for bonding points based on set cutting lengths
• System of three sets of hydraulic clamps
• Hydraulic system based on PONAR components
• Crosswise loading conveyor for introducing bundles into the machine
• Intelligent unloading system, crosswise chain conveyor
• System with two pairs of tiltable (hydraulic) rollers allowing large offcuts to freely drop onto the conveyor
• TA DRIVE gearmotors
• HIWIN linear guides with increased load capacity
• YHY Japan bearings
• YASKAWA inverters and servo motors
• 21” touchscreen operator panel
• SIEMENS PLC controller (with remote access system)
• Safety system and SICK sensors
Warranty:
12-month warranty. Service response time: 24 hours. Spare and consumable parts warehouse.
With the machine we supply:
• Operation manual
• Declarations of conformity
• Warranty card
• Electrical diagrams
• Hydraulic diagrams
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Υποβολή αιτήματος
Τηλέφωνο & Φαξ
+48 783 7... αγγελίες
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα