WEILER - τόρνος

WEILER Matador VS 2

Κατάσταση: έτοιμο προς χρήση (μεταχειρισμένο), Μήκος τόρνευσης 500 mm Διάμετρος τόρνευσης πάνω από το κρεβάτι 297 mm Διάμετρος τόρνευσης πάνω από το υποστήριγμα 160 mm Διάμετρος οπής ατράκτου 36,0 mm Υποδοχή DIN 55022 Gr. 5 Κονικος άξονας: 3 MK Διαδρομή κόντρας 90,0 mm Στροφές 30 - 3550 σ.α.λ. Στροφές κινητήρα: 1410 / 2830 σ.α.λ. Συνολική απαίτηση ισχύος 3,3 kW Τάση 380 V Βάρος μηχανήματος περ. 620 kg Διαστάσεις Μ-Π-Υ 1420 x 700 x 1200 mm Από επαγγελματική σχολή – σε εξαιρετική κατάσταση (!!) Ιδιαίτερα κατάλληλος για μέσης ακρίβειας κατεργασμένα περιστροφικά τεμάχια Nedpfx Ahjxq Hhye Iewh Εξοπλισμός: - Ανθεκτικός τόρνος με κοχλία μεταφοράς και οδηγό - ΡΟΗΜ τριών σιαγόνων τσοκ Ø 160 mm - Αναδιπλούμενο προστατευτικό τσοκ - Κλειδί τσοκ - Κάτοχος εργαλείων MULTIFIX τύπου A με 3 καινούρια ένθετα - Μετακινούμενος πίσω άξονας (κορμός) - Περιστρεφόμενο φως μηχανήματος - Πίνακας χειρισμού μπροστά αριστερά - Αυτόματες προωθήσεις για εγκάρσιο και πάνω υποστήριγμα - Βάση μηχανήματος με ντουλάπι (χώρος αποθήκευσης) - Προστατευτικό πίσω τοίχωμα για ρινίσματα - Κουμπί έκτακτης διακοπής - Εγχειρίδιο χρήσης

Κατάσταση: πολύ καλή (μεταχειρισμένο), Λειτουργικότητα: πλήρως λειτουργικό, Weiler Matador VS-2 Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout Heidenhain ND 780 from Training Workshop!! Technical specifications: >> Machine No. 7702, Year of manufacture approx. 1990 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm Nwsdpfoy T Hqcjx Ah Ijh >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Quick-action collet chuck, internal and external collets (see pictures) >> 1 piece 3-jaw chuck, 3 sets of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 that is in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs smoothly at high speeds. The machine was originally installed in a training workshop. The machine comes with extensive accessories. Take the opportunity to inspect this machine under power on site and see for yourself its very good condition.

Κατάσταση: πολύ καλή (μεταχειρισμένο), Έτος κατασκευής: 1988, Λειτουργικότητα: πλήρως λειτουργικό, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout by Elesta – from training workshop! Technical data: >> Machine no. 88-8115 Year of manufacture: 1988 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 12 mm >> Brake motor >> Weight: approx. 700 kg >> Dimensions (L x H x D): 1.4 m x 1.2 m x 0.55 m Equipment and accessories: >> 3-axis digital readout Elesta >> Quick-clamping system, internal and external collets (see photo) >> 1 pc. 3-jaw chuck, 1 set of jaws >> Multifix size A tool post with 3 holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Nedpfxey Tmkvj Ah Iswh This Weiler Matador VS-2 is offered in very good condition. The machine is, of course, fully functional. All slides operate smoothly and uniformly. The Weiler runs quietly even at high spindle speeds. The original location was a training workshop. The machine is equipped with extensive accessories. Take the opportunity to inspect the machine under power on site and convince yourself of its excellent condition.

Κατάσταση: πολύ καλή (μεταχειρισμένο), Έτος κατασκευής: 1992, Λειτουργικότητα: πλήρως λειτουργικό, Weiler Matador VS-2 Leadscrew and Feedshaft Lathe with K&C 3-Axis Digital Readout NEW in Special Light Grey Paint Finish!!! Nedpfxoyylq Uo Ah Iowh Technical data: - Machine no.: 92-027, Year of manufacture: 1992 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock taper: Morse Taper 3 (MT3) - Feeds from 0.012 to 0.9 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitches from 0.25 to 12 mm - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Equipment and features: - 3-axis digital readout by K&C, new, with 12 months manufacturer's warranty and operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick-zero function, counting direction reversal - 1 piece 3-jaw chuck incl. 1 set of jaws - 1 piece 4-jaw chuck incl. 1 set of jaws - Electronic spindle protection - Multifix size A with 2 toolholders - Motor brake - Bed stop About the machine: A Weiler Matador VS-2 is being offered in very good condition. The machine is of course fully functional and has been newly painted in light grey. A very nice machine. The K&C 3-axis digital readout was retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The slides move smoothly and evenly. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself.

Κατάσταση: πολύ καλή (μεταχειρισμένο), Έτος κατασκευής: 1992, Λειτουργικότητα: πλήρως λειτουργικό, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Speed Range: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 12 mm Nwedpfoyylqhex Ah Ijh >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12 months manufacturer's warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction switching >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 2 sets of jaws >> Electronic spindle guard >> Multifix size A quick-change tool post with 2 tool holders >> Motor brake >> Bed stop About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and are fitted with protective covers to guard against dirt. All slides run smoothly and evenly. Take the opportunity to inspect this machine live under power and convince yourself of its condition.

Κατάσταση: πολύ καλή (μεταχειρισμένο), Έτος κατασκευής: 1992, Λειτουργικότητα: πλήρως λειτουργικό, Weiler Matador VS-2 Lead and Feed Screw Lathe with Brand New K&C 3-Axis Digital Readout in Special Light Grey Paintwork!!! Technical Specifications: >> Machine No. 92-028 | Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speeds: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock Nwjdpfxeyyb T So Ah Ieh >> Tailstock Morse Taper 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread Cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Dimensions (L x H x D): 1.4 m x 1.2 m x 0.55 m Equipment and Accessories: >> New K&C 3-axis digital readout system, 12-month manufacturer warranty, supplied with operation manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference marker, tool programming (200 slots), taper calculation, radius/diameter indication, quick zero setting, counting direction selection >> 1 Three-jaw chuck with 1 set of jaws >> 1 Four-jaw chuck with 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive piece of equipment. The 3-axis digital readout by K&C has been retrofitted. All scales are new and fitted with protective covers to keep them clean. All slides move smoothly and evenly. Take the opportunity to inspect this machine under power at our site and see the condition for yourself.

Κατάσταση: μεταχειρισμένο, Έτος κατασκευής: 1992, Λειτουργικότητα: πλήρως λειτουργικό, Τόρνος Weiler Matador VS2, έτος κατασκευής 1992, τσοκ με τρία σαγόνια, Multifix, πίσω προστασία από εκτινάξεις, ηλεκτρική προστασία τσοκ. Το μηχάνημα είναι σε καλή λειτουργική κατάσταση και μπορεί να επιδειχθεί υπό ρεύμα κατόπιν συνεννόησης. Nwjdpfjx Sqvgox Ah Ioh