ταινιοπρίονο επεξεργασίας ακμών

Brandt KDF 440 Edition

Brandt KDF 1440 Edition

Only 1,700 operating hours – in very good condition – can also be delivered with preheating station XES 200 Autark (+ €4,500)

OVERVIEW OF UNIT EQUIPMENT:
- Jointing unit: 2 x 2.2 kW, 200 Hz
- Gluing unit: QA 65 N
- End trimming unit with beveled/straight cut: 2 x 0.18 kW
- Pneumatic adjustment for beveled/straight end trimming
- Multi-stage milling unit MS 40, counter-rotation
- Pneumatic 2-point adjustment
- Profile trimming unit: 1 x 0.35 kW WD 60; also suitable for construction floors
- Pneumatic 2-point adjustment, radius/bevel
- Multi-stage scraper unit MZ 40
- Glue joint scraper
- Buffing unit
- Top pressure: PU rollers instead of standard rollers
- Additional interchangeable QA 65 N application unit
- Separator agent spraying unit, workpiece side
- Automatic edge feed
- Multi-roller tracing device for multi-stage milling unit MS 40 + multi-stage scraper unit MZ 40
- Cleaning agent spraying unit

WORKPIECE AND EDGE PARAMETERS:
– Minimum workpiece width:
• For workpiece thickness 8–22 mm: 70 mm*
• For workpiece thickness 23–40 mm: 120 mm*
• For workpiece thickness 41–60 mm: 150 mm*
*Depending on workpiece length
Dsdpszb Iggofx Aa Uowa
– Workpiece protrusion: 38 mm
– Workpiece thickness: 8–60 mm
– Maximum edge height = workpiece height + 6 mm
– Edge material (coil): 0.4–3 mm
– Max. edge cross-section:
• PVC: 135 mm²
• Veneer: 100 mm²
– Max. coil diameter: 830 mm
– Edge material (strips): 0.4–8 mm
– Max. edge cross-section (strips): 360 mm²

– Feed rate: 8–14 m/min
– Max. feed rate with profile trimming: 11 m/min
– Working height: 950 mm
– Pneumatic connection: min. 6 bar
– Total length: 5,573 mm

Complete description: see PDF

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.