πλήρης πριστήριο ξυλείας (σταθερό)

EWD Sägeline Runholzplatz Stapelung EWD ZE, FZ3, FR12, FV20,

1) Log yard with 10 boxes (discharge boxes) – New and Used

Log infeed and sorting line, new
Feed speed 50 m/min. Including the following used components:
Comprising:
Cross conveyor for infeed, step feeder, new
Block conveyor, used
Block conveyor with ejector, used
Debarking unit Cambio 50, used
Split detection device with belt, used
Measuring section – sorting block conveyor.
Includes debarking;
Inspection and painting; includes log infeed. Without boxes, without
sheet metal cladding,
without measurement system,
without outfeed control
or control cabinet. Root reduction device.

2) Log Infeed for Chip/Sawmill Line

Heavy-duty cross conveyor for logs, NEW
4-strand log cross conveyor
Axle spacing: 7.5 m
Total length: 8.0 m
Drive shaft: 100 mm diameter
Chain: bushed conveyor chain, pitch
100 mm – heavy-duty version
Fixed end stops at the rear,
without sheet metal cladding
Steel support frame: HEB 200
Construction height: 1000 mm
Drive: Gear motor 7.5 kW

3) Log Straightener, NEW

Number of chains: 4
Axle spacing: 3500 mm
Overall width: 5730 mm
Distance between driver lugs: 1000 mm
Drive shaft diameter: 100 mm
Drive: SEW, 7.5 kW
Speed: 10 m/min
Design: fully sheeted/clad between chain runs

4) Step Feeder, NEW

Number of feed steps: 4
Width: 4200 mm
Sheet thickness: moving steps 12 mm, fixed steps 20 mm
Drive: SEW, 18.5 kW
Hedpfx Asykr Aqoarsn
Drive by crank system and gear motor

5) Debarking/Chipping Line (Manufacturer WD)

Block conveyor before RB 2 feeding station
Length extended to 18.5 m – drive and return roller

RB 2 Feeding Station
With driven chain bed steel enclosure, designed for side loading
of logs. Conveyor chain with drivers, frame in welded construction.
Infeed and centering unit ZE
with log turning device TDV and centering unit.
Feeding system ZE:
Log length: 2.5 – 5 m
Min. feeding width: 80 mm
Max. feeding width: 780 mm
Construction height: 1000 mm
Weight: 5400 kg

Profile chipper FZ 3
Machine frame with base frame
2 knife head housings with main bearing supports,
2 knife heads with finishing segments
Drive power: 90 kW
Log diameter: min. 100 mm, max. 400 mm
Chipping height above chain: max. 515 mm
Distance between discs: max. 570 mm, min. 60 mm
Disc diameter: 1260 mm
Positioning by electric motors

2 hydraulic units 35 kW for preliminary and final trimming

Pre-trimming cant log turning device

Electrically driven roller conveyor TR 800

Centering and infeed system ZE with FZ 3 chipper

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.