SCM TECH Z2-27-C

SCM TECH Z2-27-C

Κατάσταση: έτοιμο προς χρήση (μεταχειρισμένο), Έτος κατασκευής: 2008, διαδρομή άξονα Χ: 3.460 χιλ., διαδρομή άξονα Y: 1.615 χιλ., διαδρομή άξονα Z: 400 χιλ., αριθμός αξόνων: 5, συνολικό βάρος: 3.500 κιλ, ισχύς κινητήρα ατράκτου: 11.000 W, μέγιστη ταχύτητα ατράκτου: 20.000 στρ./λ., This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working area of 3050 mm in the X-axis, 1348 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a powerful 11 kW spindle and a 12-position tool changer. If you are looking for a high-quality CNC woodworking machine, you should consider the MORBIDELLI Author X5 that we are offering for sale. Please contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Current: 48 A • Power supply: 400 V, 50/60 Hz • Power consumption: 28 kVA • Working area: X 3050 mm, Y 1348 mm, Z 400 mm • Traversing speeds: X 50 m/min, Y 45 m/min, Z 22 m/min • Drive system: Ball screw drive on X/Y/Z axes • Pendulum operation: yes • Spindle: 5-axis Morbidelli milling spindle • C-axis rotation: 640 degrees • B-axis rotation: +/- 100 degrees • Inverter power: 18 kW • Tool holder: HSK 63F • Minimum table-to-spindle distance: 40 mm • Tool changer: rear tool magazine on X-axis • Tool changer positions: 12 • Maximum tool diameter: 240 mm • Maximum tool length: 220 mm • Maximum tool weight: 8 kg • Work table: vacuum clamping system • Vacuum pressure: 3000 Pascal • Control system: NUM 1040 • Operating system: Windows XP Professional • Processor: 32-bit Pentium • RAM: minimum 256 MB • Hard disk: minimum 2 GB • Monitor: 17 inch • Interface: RS232 • Air pressure: 6 to 8 bar • Air consumption: 250 NL/min • Dust extraction connection: 250 mm • Air speed extraction: 30 m/s • Machine dimensions: approx. 5300 x 2200 x 2500 mm • Required floor space: approx. 6300 x 4000 x 3000 mm • Safety devices: CE-compliant safety system • Central lubrication: automatic • Drilling head: 12 + 6 spindles • Vertical spindles (Y-axis): 5 • Vertical spindles (X-axis): 8 • Horizontal spindles (X-axis): 4 Cedpfx Acsy Ndn Rs Njgu • Horizontal spindles (Y-axis): 2 • Vertical spindle pitch: 32 mm • Horizontal spindle pitch: 64 mm • Drilling speed: 4000 rpm • Drilling unit power: 2.2 kW • Drill holder: M10 • Pneumatic stroke: 60 mm Additional equipment • Chip conveyor (included) • Vacuum pump 250 m3/h

Κατάσταση: μεταχειρισμένο, Έτος κατασκευής: 2013, ισχύς: 9,5 kW (12,92 ίππους), τάση εισόδου: 400 V, ρεύμα εισόδου: 31 A, συχνότητα εισόδου: 50 Hz, διαδρομή άξονα Χ: 3.050 χιλ., διαδρομή άξονα Y: 1.250 χιλ., αριθμός αξόνων: 3, τύπος ενεργοποίησης: ηλεκτρικός, συνολικό ύψος: 2.244 χιλ., συνολικό μήκος: 5.240 χιλ., συνολικό πλάτος: 2.500 χιλ., συνολικό βάρος: 2.700 κιλ, Εξοπλισμός: Σήμανση CE, Προσφέρουμε αυτό το μεταχειρισμένο κέντρο κατεργασίας SCM TECH Z1, έτος κατασκευής 2013. Ονομασία τύπου: FORA-FRESATRICE CN Codeyvpp Hjpfx Ac Negu Κατασκευαστής: SCM Αριθμός σειράς: AA1/017424 Τύπος: TECH Z1 Μοντέλο: TECH Z1 Έτος κατασκευής: 2013 Βάρος: 2.700 kg Ονομαστική τάση: 400 V Ονομαστικό ρεύμα: 31 A Συχνότητα: 50 Hz Ρεύμα βραχυκυκλώματος: 10 kA Εάν έχετε απορίες ή χρειάζεστε περαιτέρω πληροφορίες, μη διστάσετε να μας στείλετε μήνυμα ή να μας καλέσετε.

Κατάσταση: μεταχειρισμένο, Έτος κατασκευής: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length during pendulum processing mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed of X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum cups: 6 / 2 standard type Standard end stops / position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles std./number/speed 1/min: 12 (8X-5Y) / 4000 Horizontal spindles std./number/speed 1/min: 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min: 120 / 6000 Motor power kW (HP): 2.2 (3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP): 7.5 (10) / 11 (15) Max. speed 1/min: 24,000 Tool changer, traveling with the unit carrier in X: 4 positions, pneumatic Csdpfx Aceyymz Uo Negu INSTALLATION Installed power KVA: 23÷28.5 Compressed air demand Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction nozzle diameter mm: 150+150 (200) Machine weight Kg: 3,000 * X = Distance between stops, Y = Reference point at milling cutter center, Z = Workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center of C-frame design with a worktable equipped with adjustable workpiece supports and vacuum cups, suitable for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with a disc cutter in the "X" direction - General milling operations Self-supporting frame and worktable Structure made of steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or any aggregate carrier. Box construction from cold-rolled steel with internal reinforcement ribs, protective devices. Aggregate unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Travel ranges of the gantry and the unit carrier Movement on X, Y, and Z axes takes place via linear prismatic ball bearing guides using preloaded drives. The X-axis (moving column) is driven by a preloaded, backlash-free rack and pinion drive with a helical gear. The movement of the aggregate carrier in the Y and Z directions uses preloaded drives as well. Positioning of the working units and control of machine functions is managed by brushless three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical controller for milling and drilling machines and an upstream personal computer with a "XILOG PLUS" graphical user interface. PC-Office - Operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Pivoting control panel - Machine interface software Xilog Plus Xilog Plus features Programming: - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, linear in space, spiral within the chosen plane - Assisted programming with graphic and syntax help for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point offset to execute drilling on sloped or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional features: - Calculator for direct transfer of calculated data - S