Μεταχειρισμένο Υδραυλικός Κύλινδρος 50 Τόνων προς πώληση (62.638)

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 3, διάμετρος κάτω κυλίνδρου: 300 χιλ., διάμετρος άνω κυλίνδρου: 300 χιλ., διάμετρος πλευρικού κυλίνδρου: 280 χιλ., μήκος κυλίνδρου: 2.550 χιλ., μέγιστο πάχος λαμαρίνας: 18 χιλ., STANDARD EQUIPMENT * Side rolls move vertically with a hydraulic piston via orbital motion. * Protected against overloading. * All rolls are driven by hydromotors and planetary gearboxes. * The hydraulically opening head allows for easy removal of bent parts. * Very easy operation with a movable control panel. * The position of the lower rolls can be easily read with two digital displays. * Welded steel construction body. * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts. * Conical bending system with bearings. * Hydraulic balancing system for parallel shaft movement. * Extended shaft ends to allow for profile and pipe bending rolls. OPTIONAL EQUIPMENT * Overhead crane (elevator) for large diameter bending support. * Hydraulic side supports for large diameter bending. * Ground and polished rolls for special applications. * Rolls for profile bending. * Infinitely variable hydraulic speed adjustment. * Electronic balancing system for parallel shaft movement. TECHNICAL SPECIFICATIONS Lrsdpfow Slf Ujx Alpjk Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 3, διάμετρος κάτω κυλίνδρου: 250 χιλ., διάμετρος άνω κυλίνδρου: 250 χιλ., διάμετρος πλευρικού κυλίνδρου: 200 χιλ., μήκος κυλίνδρου: 3.100 χιλ., μέγιστο πάχος λαμαρίνας: 9 χιλ., συνολικό βάρος: 5.400 κιλ, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up and down movement for the rear roll and lower roll - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top roll driven by planetary gearbox - Rear roll ball system for easy sheet movement - Compliance with EU safety directives - High-strength forged rolls made from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls Lodew Slbvjpfx Alperk - Wire grooves at shaft ends - NC Control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 4, διάμετρος κάτω κυλίνδρου: 250 χιλ., διάμετρος άνω κυλίνδρου: 250 χιλ., διάμετρος πλευρικού κυλίνδρου: 200 χιλ., μήκος κυλίνδρου: 3.100 χιλ., μέγιστο πάχος λαμαρίνας: 9 χιλ., ΤΥΠΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ Ιδανικό για το λύγισμα λεπτών και μεσαίου πάχους χαλύβδινων, αλουμινένιων ή ανοξείδωτων υλικών Άριστο για το λύγισμα κυλινδρικών και διαφόρων διαμέτρων υλικών Η κάτω κύλινδρος και οι πλαϊνές κύλινδροι κινούνται πάνω-κάτω υδραυλικά με ευθύγραμμη κίνηση Προστασία κατά της υπερφόρτωσης Ο επάνω κύλινδρος κινείται με ηλεκτροκινητήρα και πλανητικό μειωτήρα. Η κάτω κύλινδρος διαθέτει κίνηση μέσω συστήματος καρδανικού άξονα. Δύο κύλινδροι έχουν ηλεκτρική κίνηση Τρεις ψηφιακές ενδείξεις διευκολύνουν την ανάγνωση της θέσης των κυλίνδρων Υδραυλικά ανοιγόμενη κεφαλή για εύκολη αφαίρεση του κατεργαζόμενου τεμαχίου Εύκολη χρήση μέσω κινητού πίνακα ελέγχου Συγκολλητό χαλύβδινο πλαίσιο Άξονες υλικού SAE 1050 (CK 45), σφυρηλατημένοι ή ελασματοποιημένοι, επαγωγικής σκλήρυνσης Σύστημα κυρτής κάμψης Υδραυλικό σύστημα εξισορρόπησης για παράλληλη κίνηση των αξόνων Συμμορφώνεται με τα πρότυπα ασφαλείας της ΕΕ και φέρει σήμανση CE Εγχειρίδιο χρήσης Lsdpfx Alew Slkkjpjrk ΠΡΟΑΙΡΕΤΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ NC χειριστήριο με δυνατότητα τηλεϋποστήριξης Άνω γερανός (ανυψωτικό) για υποστήριξη σε λύγισμα μεγάλων διαμέτρων Υδραυλικά πλευρικά στηρίγματα για υποστήριξη σε λύγισμα μεγάλων διαμέτρων Τόρνοι λειασμένοι και γυαλισμένοι Διπλό σύστημα ρύθμισης ταχύτητας Ρύθμιση ταχύτητας χωρίς βαθμίδες Υδραυλοκινητήριο περιστροφής Εξαγωγικό σύστημα ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ Μήκος κάμψης: 3100 mm Προ-λύγισμα: 5/7 mm Κάμψη: 7/9 mm Επάνω & κάτω κύλινδρος: 250 mm Πλαϊνός κύλινδρος: 200 mm Ελάχιστη διάμετρος καμπύλης: 375 / 1250 mm Ισχύς κινητήρα: 7,5 + 1,5 kW Ταχύτητα κάμψης: 5 m/min Χωρητικότητα δεξαμενής: 40 lt Μήκος: 5000 mm Πλάτος: 1200 mm Ύψος: 1370 mm Βάρος: 6800 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ελέγχου: Έλεγχος NC, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 4, διάμετρος κάτω κυλίνδρου: 380 χιλ., διάμετρος άνω κυλίνδρου: 380 χιλ., διάμετρος πλευρικού κυλίνδρου: 300 χιλ., μήκος κυλίνδρου: 4.100 χιλ., μέγιστο πάχος λαμαρίνας: 16 χιλ., ΕΞΟΠΛΙΣΜΟΣ STANDARD * Ο κάτω, ο άνω και τα πλευρικά ρολά κινούνται γραμμικά πάνω-κάτω με υδραυλικούς κυλίνδρους που είναι προσαρτημένοι στο πλαίσιο. * Προστασία κατά της υπερφόρτωσης. * Το άνω και τα πλευρικά ρολά κινούνται με υδρομοτέρ και πλανητικό μειωτήρα (κίνηση με κινητήρα σε 3 ρολά). * Εύκολη ανάγνωση των θέσεων των ρολών με τρεις ψηφιακές ενδείξεις. * Εύκολη εξαγωγή του κατεργαζόμενου τεμαχίου χάρη στην υδραυλικώς ανοιγόμενη κεφαλή και τον άξονα που ανυψώνεται αυτόματα. * Εύκολη χρήση με κινητό πίνακα ελέγχου. * Συγκολλητό χαλύβδινο πλαίσιο. * Άξονες από σφυρήλατο ή ελασματοποιημένο χάλυβα SAE 1050 (CK 50), επαγωγικά βαμμένοι σκληρότητας. * Σύστημα κωνικής καμπύλωσης. * Κεντρικό σύστημα λίπανσης. * Υδραυλικό σύστημα εξισορρόπησης για παράλληλη κίνηση των αξόνων (Ø280 -320 -350 -380 -400 -460). * Ηλεκτρονικό σύστημα εξισορρόπησης (Ø500-550-580-620 -680). * Σύστημα διπλής ταχύτητας λειτουργίας. Ledsw Smc Iepfx Alpjrk ΠΡΟΑΙΡΕΤΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ * Αυτοματισμός με NC και CNC έλεγχο. * Ανυψωτικός γερανός (ανελκυστήρας) για υποστήριξη σε καμπύλωση μεγάλων διαμέτρων. * Υδραυλικές πλάγιες στηρίξεις για υποστήριξη σε καμπύλωση μεγάλων διαμέτρων. * Υδραυλικό σύστημα εξαγωγής λαμαρίνας. * Λειασμένα και γυαλισμένα ρολά για ειδικές εφαρμογές. * Σύστημα συνεχούς ρύθμισης ταχύτητας. * Ηλεκτρονικό σύστημα εξισορρόπησης για παράλληλη κίνηση των αξόνων (Ø280 -320 -350 -380 -400 -460). ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ Μήκος καμπύλωσης: 4100 mm Προκαμπύλωση: 10/12 mm Καμπύλωση: 12/16 mm Άνω & κάτω ρολό: 380 mm Πλευρικό ρολό: 300 mm Ισχύς κινητήρα: 31,5 kw Ταχύτητα κάμψης: 1,5 - 5 m/min Μήκος: 6950 mm Πλάτος: 2250 mm Ύψος: 2350 mm Βάρος: 22000 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, τύπος ενεργοποίησης: υδραυλικός, αριθμός κυλίνδρων: 4, διάμετρος κάτω κυλίνδρου: 400 χιλ., διάμετρος άνω κυλίνδρου: 400 χιλ., διάμετρος πλευρικού κυλίνδρου: 300 χιλ., πλάτος εργασίας: 2.550 χιλ., μέγιστο πάχος λαμαρίνας: 40 χιλ., Εξοπλισμός: διακόπτης έκτακτης ανάγκης, σκληρυμένοι κύλινδροι, τεκμηρίωση / εγχειρίδιο, τηλεχειριστήριο ποδιού, STANDARD EQUIPMENT * The lower, top, and side rolls move up and down linearly via body-attached hydraulic cylinders * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3 rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Easy removal of the bent part thanks to a hydraulically opening head and automatic lifting shaft * Highly user-friendly operation thanks to a mobile control panel * Welded steel frame construction * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system Ljdpjxw Ebxjfx Alpjrk * Central lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Two-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending Capacity: 30/40 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 300 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.000 χιλ., απόσταση μεταξύ των στηλών: 1.000 χιλ., δύναμη επαναφοράς: 100 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 300 / 100 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton column-type hydraulic deep drawing press is a four-column hydraulic press solution with high rigidity, specially developed for metal forming, deep drawing, and precision pressing applications. The body is constructed from St52 grade steel and undergoes stress-relieving via vibration to ensure that parallelism and orthogonality tolerances are stably maintained throughout the long stroke during the pressing process. The ram and blankholder systems operate independently; stroke and tonnage adjustments are precisely controlled via the touch panel interface. Equipped with REXROTH or PARKER hydraulic components, an IE3 efficiency-class motor, and PLC control, the press offers high productivity and reliable operation. Automatic lubrication and electronic filter clogging alerts significantly reduce maintenance requirements. Lredpfex N Unzsx Alpek With its 300 / 100 ton capacity, this model is an ideal industrial press solution for medium- and high-tonnage metal forming, deep drawing, and die applications. Key Advantages - 4-column, high-rigidity press frame - Independent stroke and tonnage adjustment for ram and blankholder - Full control via touch panel - High precision and repeatability - Long service life with low maintenance costs Fields of Application - Metal forming operations - Deep drawing processes - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 300 Tons CAPACITY (BLANKHOLDER): 100 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 microns/m PERPENDICULARITY TOLERANCE: 60 microns/m STROKE (RAM): 800 mm STROKE (BLANKHOLDER): 200 mm MIN. DIE OPENING: 100 mm MAX. DIE OPENING: 900 mm WELD STRESS RELIEVING: Vibration stress relief WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 class MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST APPROACH SPEED: 150 mm/s DRAWING SPEED: 12 mm/s RETURN SPEED: 170 mm/s BLANKHOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 390 mm – Ck45 BLANKHOLDER CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 200 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.000 χιλ., απόσταση μεταξύ των στηλών: 1.000 χιλ., δύναμη επαναφοράς: 70 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a highly rigid four-pillar hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The St52 quality steel construction frame undergoes stress relief by vibration method, ensuring high parallelism and perpendicularity tolerances are maintained even during long-term operation. The ram and cushion systems function independently and both stroke and pressure settings can be adjusted precisely via the touch panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled architecture, this press delivers high efficiency and reliable performance. Maintenance is minimized thanks to the automatic lubrication system and electronic filter contamination warnings. With its 200 / 70 ton capacity, this model is an ideal industrial press solution for medium- and high-tonnage metal forming, deep drawing, and die applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Long service life and low maintenance cost structure Areas of Application - Metal forming operations - Deep drawing applications - Die testing and production lines - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs., induction hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 Tons CAPACITY (CUSHION): 70 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m. PERPENDICULARITY TOLERANCE: 60 micron/m. STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. DIE HEIGHT: 100 mm MAX. DIE HEIGHT: 900 mm WELDING STRESS RELIEF: Performed by vibration WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec DEEP DRAWING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION MOVEMENT SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 320 mm – Ck45 CUSHION CYLINDER BORE: Ø 190 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs. APPROXIMATE DIMENSIONS: 4000 × 1450 × 1450 mm TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7" Lrsdpfx Aox N Umqelpsk CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 14.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 80 t, διαδρομή: 500 χιλ., πλάτος τραπεζιού: 700 χιλ., μήκος τραπεζιού: 700 χιλ., απόσταση μεταξύ των στηλών: 700 χιλ., δύναμη επαναφοράς: 30 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 80/30 Tonne Four-Column Hydraulic Deep Drawing Press General Description Lsdjx N Ultepfx Alpsrk The CRONOSSTECH 80/30 tonne four-column hydraulic deep drawing press is an industrial press solution with a rigid four-column body design, engineered for metal spinning, deep drawing, and die testing operations that require high precision. The St52 quality steel frame is subjected to stress relief through vibration to ensure parallelism and perpendicularity tolerances are maintained during pressing. The ram and cushion systems operate independently; stroke and pressure settings can be precisely controlled via the operator panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-based control, the system delivers safe, energy-efficient, and long service life operation. The automatic lubrication system and filter contamination alerts minimise maintenance requirements. This model is an ideal solution for small to medium batch production, die testing, and precision forming applications. Key Advantages - Rigid four-column press frame structure - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High repeatability and precision - Low maintenance costs, extended service life Fields of Application - Metal spinning applications - Deep drawing operations - Die testing and prototyping - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened chrome-plated shaft GUIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 Tonnes CAPACITY (CUSHION): 30 Tonnes DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m. PERPENDICULARITY TOLERANCE: 60 micron/m. STROKE (RAM): 500 mm STROKE (CUSHION): 150 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 600 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE RAPID DESCENT SPEED: 150 mm/sec MOVING TABLE DRAWING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec CUSHION TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 200 mm – Ck45 CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. MACHINE HEIGHT: 3300 mm APPROX. MACHINE WIDTH: 1050 mm APPROX. MACHINE DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM GROUND: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM/CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR DISTANCE MEASURING SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCH MATERIALS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 Tonnes

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 60 t, διαδρομή: 400 χιλ., πλάτος τραπεζιού: 700 χιλ., μήκος τραπεζιού: 700 χιλ., απόσταση μεταξύ των στηλών: 700 χιλ., δύναμη επαναφοράς: 20 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-column hydraulic drawing press is a rigid and compact press solution designed for precision metal forming, deep drawing, and metal spinning applications. Its four-column structure ensures stable parallelism and perpendicularity tolerances during the pressing process. The frame is manufactured from St52 grade steel and undergoes stress relief via vibration method. The ram and pot systems can be controlled independently, and stroke and pressure adjustments are made precisely via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and an automatic lubrication system, the press offers long service life, safety, and high efficiency. The PLC-controlled system effectively minimizes operator errors. This model is an ideal solution for small and medium-scale metal spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid four-column press frame construction - Independent stroke and tonnage control for ram and pot - Adjustable system via touchscreen panel - High precision and repeatability - Low maintenance requirement, long service life Fields of Application - Metal spinning applications - Deep drawing operations - Die testing and prototype production - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Tons CAPACITY (POT): 20 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m. PERPENDICULARITY TOLERANCE: 60 micron/m. STROKE (RAM): 400 mm STROKE (POT): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELD STRESS RELIEF: Vibration stress-relief WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER INNER DIAMETER: Ø 175 mm – Ck45 POT CYLINDER INNER DIAMETER: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm Lrjdsx N Ulgjpfx Alpok APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION: Automatic (adjustable via screen) RAM / POT STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFO: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.800 χιλ., μήκος τραπεζιού: 2.600 χιλ., δύναμη επαναφοράς: 800 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed for heavy-duty deep drawing applications that require very high tonnage, large table sizes, and precise blankholder pressure. The 8-guide H-frame body structure ensures high rigidity during the pressing process, maintaining parallelism and perpendicularity tolerances over long strokes. Lodpfx Alsx N Uk Ajpjrk The CHSP 2500/800 model, with a 2500-ton main ram and 800-ton blankholder capacity, delivers maximum stability, controlled material flow, and repeatable production performance for large and deep draw tooling. The stress-relieved steel construction frame is designed by vibration method for reliable, long-life operation under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Stress-relieved body structure via vibration technique • Bronze Zr14 guide bushings • WPQR and WPS-certified welding procedures with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Monitoring of hydraulic unit oil temperature and system status via display • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram / Blankholder): 2500 / 800 tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blankholder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blankholder Cylinder: Ø450 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.400 χιλ., δύναμη επαναφοράς: 500 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed to provide maximum frame rigidity, precise parallelism, and long service life for deep drawing applications requiring very high tonnage and large table dimensions. Thanks to its 8-guided H-frame body structure, the press ram and table movements remain controlled and stable throughout the pressing process. The CHSP 1500/500 model, featuring a 1500-ton main ram and a 500-ton blank holder capacity, is specifically engineered for large-sized tooling, deep drawing, and precision-controlled forming operations. Its stress-relieved, welded-steel construction offers high strength and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Welded steel, 8-slide H-frame body structure • Stress-relieved frame by vibration • Bronze Zr14 slide bushings • WPQR and WPS certified welding by TÜRK-AK accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touch panel screen • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-slide H-frame body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 Ton Moving / Fixed Table Size: 1500 × 2400 mm Parallelism / Perpendicularity Accuracy: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Control Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Lrodpfx Asx N Ukislpjk Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.000 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., δύναμη επαναφοράς: 350 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-gib H-frame structure provides high rigidity during pressing operations, ensuring stable parallelism and perpendicularity tolerances even with large bed dimensions. The CHSP 1000/350 model, with a main ram capacity of 1000 tons and blank holder capacity of 350 tons, is specifically designed for deep drawing processes in automotive, white goods, defense, and heavy industry applications requiring controlled material flow. The steel construction frame, stress-relieved by vibration, ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Vibration-stress relieved frame structure • Bronze Zr14 gib slides • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen operator panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gib Slides: Bronze Zr14 Capacity (Ram): 1000 Ton Capacity (Blank Holder): 350 Ton Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Operator Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note Lrsdpfx Alex N Uiljpjk This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 800 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., δύναμη επαναφοράς: 270 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + die cushion) working principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-gib H-frame structure ensures high rigidity, stable parallelism, and long die life even for large table sizes during pressing. The CHSP 800/270 model, with its 800-ton main ram and 270-ton die cushion capacity, is specifically developed for processes demanding controlled material flow, particularly in automotive, white goods, defense, and heavy sheet metal forming industries. The steel construction frame, stress-relieved by vibration, provides long-lasting and reliable performance. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body • Stress-relieved frame structure via vibration • Bronze Zr14 gib liners • Welding applications with WPQR and WPS approvals certified by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and die cushion stroke control • Adjustable ram and die cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Off-line filtration and cooling unit • SIEMENS – SCHNEIDER electrical components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gib Liners: Bronze Zr14 Capacity (Ram): 800 Ton Capacity (Die Cushion): 270 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Ljdpfxsx N Uh Uj Alpork Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Die Cushion): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Die Cushion Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 600 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 200 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The 8-guideway H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the entire stroke length. The CHSP 600/200 model, featuring a 600-ton main ram and 200-ton bottom cushion (pot) capacity, is engineered to deliver precise control over the die and formed part during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to guarantee long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Frame is stress-relieved by vibration - Bronze Zr14 guideway bushings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status display on the screen - Cooling system - Off-line filtration Lrjdpfx Aox N Uhzelpsk - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 600/200 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Guideway Bushings: Bronze Zr14 - Capacity (Ram): 600 Ton - Capacity (Pot): 200 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding Procedure: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures are supervised by “welding coordination engineers” certified to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Approach Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø550 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5900 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2300 mm - Bottom Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approx. Weight: 35 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 400 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 150 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. With its 8-guided H-frame structure, the machine provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 400/150 model is designed for high-tonnage deep drawing and spinning operations, offering 400-ton main ram and 150-ton cushion capacities. The frame construction is stress-relieved by vibration to ensure long-term durability and reliable performance. ⚙️ Standard Equipment • Steel construction, 8-guided H-frame press body • Stress-relieved frame structure via vibration • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing to CE standards • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning Lrjdpfx Aex N Uhhjlpek • Real-time display of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Main Ram Capacity: 400 Tons Cushion Capacity: 150 Tons Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Cushion Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Cushion Cylinder Bore: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 5600 mm Approx. Width of Press: 3250 mm Approx. Depth of Press: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 24 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 250 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., δύναμη επαναφοράς: 80 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gib Design General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operation principle to provide precise material flow control during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 gibs ensures maximum rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently along the stroke. The CHSP 250/80 model is designed for medium to high tonnage deep drawing and spinning operations, featuring a 250-ton main ram and an 80-ton cushion (blankholder) capacity. The frame construction is stress-relieved by vibration, offering durability and reliable long-term performance. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press body - Stress-relieved structure via vibration technique - Bronze Zr14 gib bushings - WPQR and WPS approved welding applications by TÜRK-AK accredited authorities (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system Lrodpfxjx N Uaqo Alpjk - 7" DELTA touch panel interface - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical equipment 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMIR Gib Bushing: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress-relieving Welding Applications: WPQR and WPS approved by TÜRK-AK EN ISO 15614-1:2017 (All welding operations are supervised by certified welding coordination engineers as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 4200 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Unit: DELTA Touch Panel Display: DELTA 7" Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 100 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 1.000 χιλ., μήκος τραπεζιού: 1.200 χιλ., δύναμη επαναφοράς: 40 t, λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHSP 100/40 Ljdpfsx N T Uyjx Alpjrk H-Type Hydraulic Deep Drawing (Hydroforming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operation principle to provide controlled material flow for sheet metal forming, deep drawing, and hydroforming applications. The 8-guideway H-frame construction ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton blank holder (cushion) capacity, specifically engineered for precise deep drawing and hydroforming operations. The frame is stress-relieved via vibration, ensuring a long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame body - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS approved welding by TÜRK-AK accredited applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status displayed on-screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-guideway H-frame body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 100 Ton Capacity (Cushion): 40 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding Applications: WPQR and WPS approval by TÜRK-AK accredited certifier EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Hydroforming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Table Advancing Speed: 30 mm/sec Main Cylinder Bore: Ø230 mm – Ck45 Cushion Cylinder Bore: Ø140 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.800 χιλ., μήκος τραπεζιού: 2.600 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8 Sliding Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and embossing operations requiring very high tonnage. The 8-slide H-frame structure ensures maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are reliably maintained throughout the long stroke. The CHP 2500 model, with its large bed dimensions, multi-cylinder main pressing system and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment Lrsdpfjx N T S Eex Alpok - Steel construction, 8-slide H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified with TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing comply with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination monitoring - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relief Welding Application: TÜRK-AK accredited WPQR & WPS, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 6500 mm Approx. Width of Press: 3950 mm Approx. Depth of Press: 2600 mm Bottom Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 2.000 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guide H-frame construction ensures maximum rigidity during pressing and maintains parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful drive, is a reliable and durable solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration for stable operation. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guides - Stress-relieved frame by vibration - Bronze Zr14 guide bushings - TURK-AK accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination alert - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 2000 Type: Steel construction, H-frame with 8 guides Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 2000 Ton Moving Table Dimensions: 1500 × 2500 mm Fixed Table Dimensions: 1500 × 2500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TURK-AK under EN ISO 15614-1/2017 welding application certificate Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Spinning Speed: 12 mm/s Lsdpfx Aex N T Srslpork Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6300 mm Approx. Press Width: 3850 mm Approx. Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 95 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.400 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, spinning, and heavy forming applications that require high tonnage. The 8-guided H-frame structure provides maximum rigidity and stability during pressing, ensuring the maintenance of parallelism and perpendicularity tolerances. The CHP 1500 model, with its large table dimensions, robust hydraulic system, and high stroke capacity, delivers a reliable solution for automotive, defense, heavy metal forming, and industrial production lines. The frame is stress-relieved through vibration to ensure long-term durability and stable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame (by vibration) - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel screen - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components Lodpfx Aox N T R Uslpsrk 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1,500 Ton Moving Table Size: 1,500 × 2,400 mm Fixed Table Size: 1,500 × 2,400 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1,000 mm Min. Daylight: 200 mm Max. Daylight: 1,200 mm Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Rapid Down Speed (Moving Table): 150 mm/s Deep Drawing Speed (Moving Table): 12 mm/s Return Speed (Moving Table): 170 mm/s Main Cylinder Inner Diameter: Ø620 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height of the Press: 6,250 mm Approximate Width of the Press: 3,750 mm Approximate Depth of the Press: 2,500 mm Lower Table Height from Floor: 1,500 mm Pre-fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 70 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.200 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame structure, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress relieved using vibrational methods, ensuring that the loads generated during pressing are evenly distributed, maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment Lsdpfjx N T Rujx Alpjrk - Steel construction, 8-guided H-frame press type - Stress-relieved frame structure via vibration - Zr14 bronze slide bearings - WPQR and WPS approved welding operations accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7’’ DELTA touchscreen control panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Visualization of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bearings: Zr14 Bronze - Capacity (Ram): 1200 Ton - Moving Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Through vibration - Welding Application: TÜRK-AK accredited, WPQR & WPS certified, EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Fast Down Speed (Moving Table): 150 mm/s - Drawing Speed (Moving Table): 12 mm/s - Return Speed (Moving Table): 170 mm/s - Main Cylinder Bore: Ø560 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6100 mm - Approx. Press Width: 3550 mm - Approx. Press Depth: 2400 mm - Lower Table Height (from floor): 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 60 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 1.000 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.500 χιλ., μήκος τραπεζιού: 2.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8 Guide Rails General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The H-frame structure with 8 guide rails ensures even distribution of high forces generated during pressing operations, providing maximum rigidity, precision, and long service life. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industry requirements in mind. The frame and main load-bearing structures are stress-relieved using vibration techniques. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide-rail H-type press frame - Stress-relieved frame structure by vibration - Bronze Zr14 guide bushings - Turkiye Accreditation Agency (TÜRK-AK) accredited WPQR & WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guide-rail H-frame press Frame Material: St52 – ERDEMIR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Ton Movable Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relief Welding Certification: EN ISO 15614-1/2017, WPQR and WPS certified by TÜRK-AK Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 6000 mm Approximate Width: 3450 mm Approximate Depth: 2400 mm Lower Table Height from Ground: 1450 mm Main Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 55 Tons Lodpfex N T Rbsx Alpork Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 600 t, διαδρομή: 800 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial machines engineered for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guide H-frame structure ensures balanced load distribution during pressing, resulting in long service life and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are designed for heavy-duty operations. The frame and carrier components are stress-relieved using vibration techniques. Bronze Zr14 slide bushings ensure uniform load distribution and high precision throughout the ram stroke. ⚙️ Standard Equipment • Welded steel construction, H-frame with 8 guide slides • Stress-relieved frame (vibration method) • Bronze Zr14 slide bushings • TURK-AK accredited WPQR & WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing conforming to CE standards • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic contamination indicator for hydraulic filters • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light barrier (standard for operator safety) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 600 Type: Welded steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMIR Slide Bushings: Bronze Zr14 Capacity (Ram): 600 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration method Welding: TURK-AK accredited WPQR & WPS certified (EN ISO 15614-1/2017), inspected by certified welding coordinators (EN ISO 14731) Lsdpjx N T Iasfx Alperk Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore Diameter: Ø550 mm – Ck45 Pot Cylinder Bore Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5,900 mm Approx. Press Width: 3,250 mm Approx. Press Depth: 2,300 mm Lower Table Height from Ground: 1,400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 28 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 500 t, διαδρομή: 1.000 χιλ., πλάτος τραπεζιού: 1.200 χιλ., μήκος τραπεζιού: 1.500 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8 Guided Sliders General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slider H-frame structure ensures stable and repeatable operation by providing balanced distribution of high loads during pressing. The CHP 500 model is designed for heavy-duty production processes that demand high tonnage, targeting long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed specifically for demanding, heavy-duty operation. The frame and load-bearing components are stress-relieved by vibratory methods. Bronze Zr14 slider bushings ensure even load distribution along the ram stroke, maintaining long-term precision. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 guided sliders - Vibratory stress-relieved frame and load-bearing parts - Bronze Zr14 slider bushings - WPQR & WPS certified and TÜRK-AK accredited welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured according to CE standards - PLC-controlled hydraulic system - DELTA 7” touch screen - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 500 Type: Steel construction, H-type frame with 8 guided sliders Frame Material: St52 – ERDEMİR Lrsdpfx Asx N T H Aelpok Slider Bushings: Bronze Zr14 Capacity (Ram): 500 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 1100 mm Stress Relief: Vibratory method ding Welding Application: WPQR & WPS certified by TÜRK-AK, holds EN ISO 15614-1/2017 welding certificate (inspected by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Rapid Descent Speed (Moving Table): 150 mm/sec Drawing Speed (Moving Table): 12 mm/sec Return Speed (Moving Table): 170 mm/sec Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Κατάσταση: καινούργιο, Έτος κατασκευής: 2025, δύναμη συμπίεσης: 200 t, διαδρομή: 600 χιλ., πλάτος τραπεζιού: 800 χιλ., μήκος τραπεζιού: 1.000 χιλ., λειτουργική πίεση: 250 δοκός, Εξοπλισμός: τεκμηρίωση / εγχειρίδιο, φωτοηλεκτρικός φράκτης ασφαλείας, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-slide H-frame structure, forces generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 200 model is designed for reliable performance and long service life in medium-to-high tonnage applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved by vibration methods. The bronze Zr14 slide bearing system ensures smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slides - Frame and supporting components stress-relieved by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame with 8 slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 200 tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Ledpfx Alox N T D Uspork Stress Relief: Vibratory stress relief Welding: WPQR & WPS certified by TÜRK-AK, in accordance with EN ISO 15614-1:2017, supervised by certified welding coordination engineers to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 8 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.